[arm-allstar] Question on tax registry

[W0KGW]

[root at allstarpi1 asterisk]# ping allstarlink.org
PING allstarlink.org (67.215.233.179) 56(84) bytes of data.
64 bytes from allstarlink.org (67.215.233.179): icmp_seq=1 ttl=48 time=72.6 ms
64 bytes from allstarlink.org (67.215.233.179): icmp_seq=2 ttl=48 time=71.9 ms
64 bytes from allstarlink.org (67.215.233.179): icmp_seq=3 ttl=48 time=72.9 ms
64 bytes from allstarlink.org (67.215.233.179): icmp_seq=4 ttl=48 time=73.1 ms
^C
--- allstarlink.org ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3180ms
rtt min/avg/max/mdev = 71.977/72.673/73.120/0.436 ms

All connections are wired.
Internet is DSL, and stable, other devices are using it just fine. 
Firewall hasn’t changed rules and was working pre-thursday.

/var/lib/asterisk/rpt_extnodes.txt does not exist

I do see this via supermon/All Nodes Status

**************************** CHANNELS *****************************
Channel                      Peer             Username    ID (Lo/Rem)  Seq (Tx/Rx)  Lag      Jitter  JitBuf  Format  FirstMsg    LastMsg
(None)                       67.215.233.178   (None)      00698/00000  00001/00000  00000ms  0000ms  0040ms  unknow  Tx:REGREQ   Tx:REGREQ 
IAX2/iaxrpt-5029             192.168.33.123   iaxrpt      05029/25041  00204/00196  00085ms  0000ms  0040ms  unknow  Rx:NEW      Tx:ACK    
2 active IAX channels
The odd part is the (None) for username, shouldn’t that have my node ID as a username to register with?
2nd node registered is my iaxrpt client, so at least I know it can accept a local subnet login and send/hear audio fine.

Cheers,
Joel
W0KGW

> On Jul 30, 2017, at 7:59 PM, Doug Crompton via arm-allstar <arm-allstar at hamvoip.org> wrote:
> 
> Joel,
> 
> Yes it says it is not registering so that is the issue. A couple of
> questions -
> 
> You do have good Internet access and domain lookup?
> 
> At the Linux prompt ping allstarlink.org or ucsd.edu
> Are you getting returns?
> 
> Are you using a wireless provider through a cell or a fixed connection at
> home either wired or wireless?
> 
> 
> *73 Doug*
> 
> *WA3DSP*
> 
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> 
> 
> 
> 
> On Sun, Jul 30, 2017 at 8:34 PM, "Joel Jameson via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
> 
>> I’ve been trying to track down a gremlin that since Thursday my node is
>> unable to be connected to, nor can it connect to anything else. It’s
>> happily working locally, with all it’s anouncements and such.
>> 
>> I’m pretty sure it’s related to registering with allstar, I’ve verified
>> the node and password are correct in iax.conf.
>> 
>> allstarpi1*CLI> iax2 show registry
>> Host                  dnsmgr  Username    Perceived             Refresh
>> State
>> 67.215.233.178:4569   Y       41187       <Unregistered>             60
>> Timeout
>> allstarpi1*CLI> iax2 show registry
>> Host                  dnsmgr  Username    Perceived             Refresh
>> State
>> 67.215.233.178:4569   Y       41187       <Unregistered>             60
>> Request Sent
>> allstarpi1*CLI>
>> 
>> It just does this over and over, going from request sent to timeout, then
>> repeating.
>> 
>> Any ideas or suggestions?
>> 
>> Cheers,
>> Joel
>> W0KGW
>> _______________________________________________
>> 
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org