[arm-allstar] Duplex=0 - messages still possible

[Doug Crompton]

OK good to know and that probably is a good feature since  you do have
control over it. So the answer is yes, in duplex=0 localplay and playback
do work. If the hourly cron is a problem then comment it out.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Sun, Jul 30, 2017 at 9:13 PM, Stephen - K1LNX <k1lnx at k1lnx.net> wrote:

> I have the same setup (SCOM 7330 with a pair of CDM's on port 1, AllStar
> on port 2) with duplex=0/linktolink=yes and localplay does indeed work. I
> use it all the time for newsline and other announcements and such that I
> don't want to send out globally, globalplay exhibits the same behavior.
>
> 73
> Stephen
> K1LNX
>
>
>
>
> On Sun, Jul 30, 2017 at 8:55 PM, "Doug Crompton via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
>> That is strange because the hourly cron time is calling asterisk and
>> sending an rpt localplay command the same as doing it manually with the
>> client. That says that localplay is not muted by duplex=0.
>>
>> Can you play any sound file locally through the repeater?
>>
>> In the asterisk client (asterisk -rvvv) do -
>>
>> rpt localplay <node> node-id
>>
>> Does it play the node ID? It could be any Asterisk valid sound file not
>> just node-id.
>>
>>
>> *73 Doug*
>>
>> *WA3DSP*
>>
>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>>
>>
>>
>> On Sun, Jul 30, 2017 at 8:27 PM, "Tom Hayward via arm-allstar" <
>> arm-allstar at hamvoip.org> wrote:
>>
>> > On Sun, Jul 30, 2017 at 4:10 PM, "John Huggins via arm-allstar"
>> > <arm-allstar at hamvoip.org> wrote:
>> > > Hello,
>> > >
>> > > ; duplex=0 - Half duplex with no telemetry
>> > > ; tones or hang time. Special Case: Full
>> > > ; duplex if linktolink is set to yes.
>> > > ; This mode is preferred when interfacing
>> > > ; with an external multiport repeater controller.
>> > >
>> > > So if I use duplex=0 on a port of my SCOM (working well for Echolink
>> > > by the way) are there any reasons I cannot have the Allstar system
>> > > manage and transmit voice messages out the repeater using the cron
>> > > system?
>> >
>> > We have an SCOM 7330 with Asterisk attached to one port and these
>> > app_rpt settings:
>> >
>> > duplex=0
>> > linktolink = yes
>> >
>> > We don't hear courtesy tones or the IDer, but the hourly time
>> > announcement triggered via cron still plays.
>> >
>> > Tom KD7LXL
>> > _______________________________________________
>> >
>> > arm-allstar mailing list
>> > arm-allstar at hamvoip.org
>> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> >
>> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
>> >
>> >
>> _______________________________________________
>>
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>
>
>