[arm-allstar] Duplex=0 - messages still possible

[Doug Crompton]

duplex=0 turns off ALL telemetry via Asterisk/Allstar whether
via internal command or via cron using Asterisk.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Sun, Jul 30, 2017 at 7:10 PM, "John Huggins via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hello,
>
> ; duplex=0 - Half duplex with no telemetry
> ; tones or hang time. Special Case: Full
> ; duplex if linktolink is set to yes.
> ; This mode is preferred when interfacing
> ; with an external multiport repeater controller.
>
> So if I use duplex=0 on a port of my SCOM (working well for Echolink
> by the way) are there any reasons I cannot have the Allstar system
> manage and transmit voice messages out the repeater using the cron
> system?
>
> I am only asking in case there is an obscure road block awaiting us
> before we head down the rabbit hole.
>
> Thanks.
>
> John, kx4o
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>