[arm-allstar] Help Radio to GPIO Channel Select

[Sam Skolfield]

You can do 15 channels via 4 logic inputs with the CDM. It's binary
select...
Example:
1000 channel one
0100 channel two
1100 channel three
0010 channel four
1010 channel five
0110 channel six
Etc etc...

On Sun, Jul 30, 2017 at 10:32 AM "Bobby Bruton via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> I need some assistance, I have a challenge, I have a dual node setup
> running Comptons's latest release in a Pi3.Using Motorola CDM commercial
> Radios with URI interfaces, everything is running fine, but I want to use
> the channel controll built into the AUX pin assignment in the radio that
> part I have no problem assigning the pins in the radio,you can only do 4
> channels per radio in channel select aux io pin assignment which is
> fine.Let me get to the piont.I have 2 Radios, I wanna be able to go to
> Supermon have a drop down menu that will let me use the GPIO to select
> channels on the radios,independently, which will give me a latchd hi or
> latched open output. example of DROP DOWN in supermon would look similar to
> this
> VHFCH1 on or off CH2 on or offCh3 on or offCh4 on or off
> UHFCh1 on or offCh2 on or offCH3 on or offCh4 on or off
>
> and if possable to change the name of CH to say, like ex,  My Repeater on
> or off
>                        Johns Repeater on or off
>                                                                  ETC
> "I am not good with command line so this will have to be eather a file I
> can copy and paste to a directory or directory's
> or written as a how to guide for dummies. step by step line by line"
> Many thanks Hope you guys are up to the challange 73's BobAG5BB
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org

-- 
KJ6QFS
Sam Skolfield