[arm-allstar] Trouble with dtmf script commands

[kd4ont]

Okay then. My problem must be I  have <> encapsulating the node number. Strip them out and it should work I'm seeing by your example.

-------- Original message --------
From: Doug Crompton via arm-allstar <arm-allstar at hamvoip.org> 
Date: 07/25/2017  17:54  (GMT-05:00) 
To: ARM Allstar <arm-allstar at hamvoip.org> 
Cc: Doug Crompton <wa3dsp at gmail.com> 
Subject: Re: [arm-allstar] Trouble with dtmf script commands 

I guess I am not sure what you are talking about. The 4 lines commented out
are already in the functions section of the hamvoip code. All you have to
do is uncomment the one you want and change the function character if you
prefer something else.

; Example functions to call scripts
; These are commented out. Remove ';' and change function
; command and node to your choice
; Note that halting the system remotely would require
; a power cycle to recover.
;
;A1=cmd,/usr/local/sbin/sayip.sh 27225          ; Say local IP to radio
;A3=cmd,/usr/local/sbin/saypublicip.sh 27225    ; Say Public IP to radio
;B1=cmd,/usr/local/sbin/halt.sh 27225           ; Halt the system (linux
total shutdown)
;B3=cmd,/usr/local/sbin/reboot.sh 27225         ; Reboot the system
;B6=cmd,/usr/local/sbin/astres.sh               ; Restart Asterisk


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Tue, Jul 25, 2017 at 4:20 PM, "kd4ont via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> I followed the instructions in scripts.pdf for shutdown and reboot. If I
> remember correctly, it was stated to add the line of commands in rpt.conf
> in the functions section. Unless I'm blind, I only saw one functions
> section. It was functions(xxxxxx) node number and at the bottom of the
> file, after the second node.
> I added the info verbatim, but only changed the number after the A. I also
> left <node> at the end. That didn't work. I reread the instructions and
> changed node to my node number <xxxxxx>. I created a second line, like the
> first, but changed A to another letter on dtmf and pointed it to the reboot
> or restart.sh file. Nothing happens when I key up, press the letter and
> numbers for the function and unkey.
> I don't have my node with me at the time of writing this email.
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org