[arm-allstar] Error parsing device parameters

[Doug Crompton]

Tom,

 Since you are the only one out of thousands that has had this problem I
doubt it is a general SW issue. More likely you have a corrupted SD card.
If you have made configuration changes other than the normal setup I would
save out your config files for Allstar and reburn a new SD card, set it up
and if necessary copy the config files over to it.

BTW level setting can be done in the file -

/etc/asterisk/simpleusb_tune_usb.conf

It will look something like this -

[usb]
; name=usb
; devicenum=0
devstr=1-1.5:1.0
rxmixerset=450
txmixaset=200
txmixbset=500
preemphasis_override=no
deemphasis_override=no
plfilter_override=yes
rxboost_override=yes

Normally you do not alter this file and simpleusb_tune_menu writes to it.
In a pinch you could carefully change the levels here. You obviously would
not have the luxury of a display though.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*



On Sun, Jul 23, 2017 at 6:08 PM, "Tom Hayward via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> I've run the update a couple times now. The guy I'm with thinks the
> update caused the problems. :-)
>
> Tom
>
> On Sun, Jul 23, 2017 at 3:07 PM, David McGough <kb4fxc at inttek.net> wrote:
> >
> > Try updating via pacman to make sure you've got the latest code.
> >
> > That error indicates that Asterisk isn't returning the correct number of
> > parameters after being queried by simpleusb-tune-menu....None of that
> code
> > has changed in months now.
> >
> > 73, David KB4FXC
> >
> >
> >
> > On Sun, 23 Jul 2017, Tom Hayward wrote:
> >
> >> Indeed, it's symbolic link to
> >> /usr/local/hamvoip-asterisk/sbin/simpleusb-tune-menu
> >>
> >> What's the error actually mean? We're up at the site now and pretty
> >> much out of ideas. Everything seems to be working except the levels
> >> are way off, and I don't know how to tune them without
> >> simpleusb-tune-menu.
> >>
> >> Tom
> >>
> >> On Sun, Jul 23, 2017 at 2:57 PM, David McGough <kb4fxc at inttek.net>
> wrote:
> >> >
> >> > Hi Tom,
> >> >
> >> > I just tested simpleusb-tune-menu here on a couple live systems and my
> >> > development system and it works fine here.
> >> >
> >> > I'll check further...But, note that /usr/bin/simpleusb-tune-menu
> should be
> >> > a symbolic link:
> >> >
> >> > /usr/bin/simpleusb-tune-menu -> /usr/local/hamvoip-asterisk/
> sbin/simpleusb-tune-menu
> >> >
> >> > 73, David KB4FXC
> >> >
> >> >
> >> > On Sun, 23 Jul 2017, "Tom Hayward via arm-allstar" wrote:
> >> >
> >> >> I just did a new install of Hamvoip, ran through the startup wizard,
> >> >> and when I get to the tuning step I get this error:
> >> >>
> >> >> [root at asterisk]# simpleusb-tune-menu
> >> >> Error parsing device parameters: count=1 (07/23/2017)
> >> >>
> >> >> I looked through the configuration files and don't see any obvious
> >> >> issues. Any idea where to look? I ran through the startup script a
> >> >> second time but the error persists.
> >> >>
> >> >> I tried to read the contents of /usr/bin/simpleusb-tune-menu but the
> >> >> script is a binary so I can't tell what part of the code this error
> >> >> comes from.
> >> >>
> >> >> Tom KD7LXL
> >> >> _______________________________________________
> >> >>
> >> >> arm-allstar mailing list
> >> >> arm-allstar at hamvoip.org
> >> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >> >>
> >> >> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >> >>
> >> >
> >>
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>