[arm-allstar] FOB Photos

[George Gianios]

Doug -- No attachments! 

-----Original Message-----
From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
"Doug Crompton via arm-allstar"
Sent: Friday, July 7, 2017 9:58 AM
To: ARM Allstar
Cc: Doug Crompton
Subject: [arm-allstar] FOB Photos

Attached are examples of how to package the open board FOB. This shows using
a DB25 wired to emulate a DMK/URI. The USB connections are wired directly to
the board from a cut USB cable. The board is mounted on a sub board where
all of the connections are made. The two wires to the CM108 in the second
photo are fed under the row of pins from the right and tacked at the last
pin on the left.

I encourage you to make this a DIY project but the FOB shown here is being
made and is available for purchase. I hesitated to make this public as it is
more a service than a business and I don't want the producer to become
inundated!


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org