[arm-allstar] Command response not working (v1.5)

[Justin Reed]

Doug,

I tried a few things, and it appears that setting linktolink = yes is 
what allowed the voice to start working.

Thanks,
Justin


On 1/31/2017 2:24 PM, "Doug Crompton via arm-allstar" wrote:
> Justin,
>
>   This ONLY plays to the first node in your rpt.conf file unless you have it
> defined otherwise. Sound only plays locally to an active node on your
> server.
>
> If the example shown below it plays to 1998 which is a default setting
> before you do setup. Once setup these numbers change to the node number
> entered at setup. If you have changed this it could be your problem.
>
>
> A1=cmd,/usr/local/sbin/sayip.sh 1998            ; Say local IP to radio
> A3=cmd,/usr/local/sbin/saypublicip.sh 1998      ; Say Public IP to radio
> B1=cmd,/usr/local/sbin/halt.sh 1998             ; Halt the system (linux
> total shutdown)
> B3=cmd,/usr/local/sbin/reboot.sh 1998           ; Reboot the system
> B6=cmd,/usr/local/sbin/astres.sh                ; Restart Asterisk
>
>
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*