[arm-allstar] Echolink loading in V1.5

[Max]

I just checked modules.conf and the "noload=chan_echolink.so" line has a
semicolon ; in front of it.  However, the echolink.so module isn't
loading.  I can manually load it from CLI, but it is not loading on bootup.

On Sat, Jan 28, 2017 at 4:58 PM, "Steve Agee via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> enable the Echolink Channel Driver in /etc/asterisk/modules.conf
>
> N5ZUA
>
>
>
> On 1/28/2017 3:54 PM, "Max via arm-allstar" wrote:
>
>> Echolink does not appear to be loading when V1.5 boots.  After booting I
>> can go into CLI client and issue an echolink dbdump and get nothing.
>> However, when I load the Echolink module from CLI using the "module load
>> chan_echolink.so" command then Echolink loads and the echolink dbdump
>> returns the usual long list of Echolink nodes.
>>
>> What loads Echolink?  Where might I look?
>> _______________________________________________
>>
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>
>>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>