[arm-allstar] IAXrpt n00b question

[mca555 at mac.com]

Hi Doug,

Thanks for the help!  I did, indeed, follow your How-To to no avail.  However, I did finally make it all work by starting from scratch.  My best guess is that it was probably a typo, although I couldn’t find it.  Alternatively, I may have accidentally inserted a control character.  Or, it was just plain old MAGIC! :)

Thanks again!
Mark






Message: 2
Date: Wed, 22 Feb 2017 12:23:53 -0500
From: Doug Crompton <wa3dsp at gmail.com <mailto:wa3dsp at gmail.com>>
To: ARM Allstar <arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>>
Subject: Re: [arm-allstar] IAXrpt n00b question
Message-ID:
	<CAMp6vstQTs-DBhLF1LCKMgcT5tvm1x13UKrHf0E=DEuMZpoUkg at mail.gmail.com <mailto:CAMp6vstQTs-DBhLF1LCKMgcT5tvm1x13UKrHf0E=DEuMZpoUkg at mail.gmail.com>>
Content-Type: text/plain; charset=UTF-8

Mark,

Have you followed the howto at hamvoip.org <http://hamvoip.org/>?

https://www.hamvoip.org/iaxrpt-config.pdf <https://www.hamvoip.org/iaxrpt-config.pdf>

Everything is installed in all hamvoip images to run iaxrtp. All you need
to do is specify a password in the iax.conf file (iaxrpt stanza secret=) or
have specified an iaxrpt password when you did the initial setup. Then you
need to setup the account in your iaxrpt client. This is shown in the howto.

Keep in mind if you are using an iax  port other than 4569 you need to
specify it in the IP address field in iaxrpt and you need to use local IP
addresses if accessing it locally and public IP addresses if remote. If
remote the iax port needs a port forward in your router.

Example for different port -

192.168.1.100:4568

iaxrpt has nothing to do with being Allstar registered. You could access
any Asterisk/Allstar system in this way public or private.



*73 Doug*

*WA3DSP*