[arm-allstar] V3 PI question

[David Morley]

Ok, update.  Dave McGough. Apparently there is a buggs bunny somewhere. I was able to successfully log into the pi with Juice Ssh on my LG tablet.  
 Doug. Am I able to instal the vnc server package to run with this version of pi?

I guess since I'm able to use Juice SSH I may not need vnc. 

Tnx Dave. 

Sent from my iPhone

> On Feb 21, 2017, at 11:14 PM, Doug Crompton via arm-allstar <arm-allstar at hamvoip.org> wrote:
> 
> David,
> 
> I assume you used a monitor and keyboard to set up your system and then
> later you are trying to enter via ssh.
> 
> The default port is 222 and you said you changed that. You edited
> /etc/ssh/sshd_config ???  You should not use 22 so try putting it back to
> 222.
> 
> If you connect a monitor and keyboard you can ssh to yourself there to test
> it. At the Linux prompt -
> 
> ssh 127.0.0.1 -p 222
> 
> This should take you through the login process and you will get the admin
> screen when you get logged in. Exit from there and you will be back to the
> original prompt.
> 
> One thing that often fouls people up is the username you are connecting
> with when ssh'ing from another host. To be safe do an ssh this way to the
> Allstar server.
> 
> ssh root at 127.0.0.1 -p 222
> 
> If from an external source you would use the real local IP address of the
> Pi.
> 
> If this works then I think you have something crazy going on with your
> network. Is it possible you have two devices on the same IP address? Check
> in your router.
> 
> Many use putty in Windows and with that you just put in the IP address and
> 222 for the port. It will probably ask you a security question which you
> say yes to then login with user and pass.
> 
> If all else fails rewrite an image and try again. Login immediately using
> SSH and not a keyboard and monitor. You can setup that way just as well.
> 
> 
> 
> *73 Doug*
> 
> *WA3DSP*
> 
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> 
> On Wed, Feb 22, 2017 at 1:12 AM, "David Morley via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
> 
>> I installed the latest RPi version from the WinZip file to a new V3
>> Raspberry Pi
>> Everything is working fine, but I cannot log into the pi with ssh  I am
>> immediately disconnected
>> upon a connection being established. for a split second I see the screen
>> go from grey to blue before the
>> connection is disconnected.  If you can answer it I would appreciate it
>> Thank You
>> David
>> _______________________________________________
>> 
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org