[arm-allstar] Baofeng 888 and URI

[Dan Ozment]

-----Original Message-----
From: David McGough [mailto:kb4fxc at inttek.net] 
Sent: Sunday, February 19, 2017 11:42 PM
To: "Dan Ozment via arm-allstar" <arm-allstar at hamvoip.org>
Cc: Dan Ozment <dan at ozment.net>
Subject: Re: [arm-allstar] Baofeng 888 and URI



Hi Dan,

I'm guessing you're using the V1.5 hamvoip release?  If so, you can now
dynamically adjust all these parameters from the simpleusb-tune-menu
program....Check out the 'v' menu option which will give you a real-time
display of the COS (and other) signaling.

If you change settings, make sure to save your changes with the write
('w') command.


73, David KB4FXC


On Sun, 19 Feb 2017, "Dan Ozment via arm-allstar" wrote:

> I had PTT inverted.  Toggled that so that PTT is active low, and it's not
> transmitting constantly.  COS now behaving correctly too since the thing
> isn't transmitting all the time!  Sorry for my ignorance.  I'll check the
> levels again tomorrow.
> 
> Dan
> 
> 
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>