[arm-allstar] Hang time

Mike - W5JR w5jr.lists at gmail.com
Wed Feb 1 20:35:44 EST 2017


The hang time in rpt.conf affects the TX associated with that node from all incoming sources. So, if some sources have no delay and others do, I would begin with those sources. 

tnx
Mike / W5JR
Alpharetta GA

> On Feb 1, 2017, at 7:17 PM, Tim Sawyer via arm-allstar <arm-allstar at hamvoip.org> wrote:
> 
> Doesn't matter, There is no hang time between connections, local or remote.
> 
> On Wed, Feb 1, 2017 at 3:47 PM, "Mark P via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
> 
>> Tim, are you talking about nodes that exist on the same system or distant
>> nodes?
>> 
>> Thank you
>> 
>>> On Wed, Feb 1, 2017 at 3:44 PM, Tim Sawyer <tisawyer at gmail.com> wrote:
>>> 
>>> Does the repeater activate when some one talks on the XRF module?
>>> 
>>> What I can tell you for sure is that the connections between AllStar
>> nodes
>>> cannot have hang time.
>>> 
>>>> On Wed, Feb 1, 2017 at 1:10 PM, Mark P <desertmansd at gmail.com> wrote:
>>>> 
>>>> Tim, the hang also occurs when someone is connected via dongle or dvap
>> to
>>>> the XRF module that talks to the dstar channel driver.
>>>> 
>>>> 73
>>>> Ted
>>>> 
>>>>> On Feb 1, 2017 12:45 PM, "Tim Sawyer" <tisawyer at gmail.com> wrote:
>>>>> 
>>>>> It's probably your Dstar repeater hang time plus the hang time of the
>>>>> analog Repeater's.  I'm assuming you probably have a mobile (node
>> 29941)
>>>>> listening to the Dstar repeater. If that is the case there is no
>> AllStar
>>>>> solution for this. You have to remove the hang timer from the D star
>>>>> machine or mask it with PL if there is such a thing on Dstar.
>>>>> 
>>>>> On Wed, Feb 1, 2017 at 12:17 PM "Mark P via arm-allstar" <
>>>>> arm-allstar at hamvoip.org> wrote:
>>>>> 
>>>>>> A brief description of our system befoer I ask the question. We (PAPA
>>>>>> system) have several allstar nodes, 29941 dstar channel, 29926
>> Echolink,
>>>>>> 29940 IRLP and 40685 <-->43626 where our RTCMs are connected and that
>>>>>> serves as node that we tie all the other nodes to. Allstar is install
>> on
>>>>>> the same physical system that we have XRF012 running on so that we can
>>>>>> tie
>>>>>> our analog system to dstar and other things.
>>>>>> 
>>>>>> It seems we have an unusually long hange time (8 sec) on our analog
>>>>>> repeaters whenever there is any activity coming through on our node
>>>>>> 29941
>>>>>> from dstar. We don't experience this whenever there is activity on the
>>>>>> other nodes. What setting in asterisks can I change to decrease the
>> hang
>>>>>> time? Below is another clairification on how the nodes are connected.
>>>>>> 
>>>>>> analog repeaters---->43626<-->40685<-->29941---->dstar
>>>>>> 
>>>>>> Any help would be greatly appreciated.
>>>>>> 
>>>>>> 73
>>>>>> Ted
>>>>>> W6SAT
>>>>>> _______________________________________________
>>>>>> 
>>>>>> arm-allstar mailing list
>>>>>> arm-allstar at hamvoip.org
>>>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>>>> 
>>>>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>>>>> 
>>>>> --
>>>>> --
>>>>> Tim
>>>>> 
>>>> 
>>> 
>>> 
>>> --
>>> --
>>> Tim
>>> 
>> _______________________________________________
>> 
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>> 
> 
> 
> 
> -- 
> --
> Tim
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org


More information about the arm-allstar mailing list