[arm-allstar] Hang time

[Tim Sawyer]

Doesn't matter, There is no hang time between connections, local or remote.

On Wed, Feb 1, 2017 at 3:47 PM, "Mark P via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Tim, are you talking about nodes that exist on the same system or distant
> nodes?
>
> Thank you
>
> On Wed, Feb 1, 2017 at 3:44 PM, Tim Sawyer <tisawyer at gmail.com> wrote:
>
> > Does the repeater activate when some one talks on the XRF module?
> >
> > What I can tell you for sure is that the connections between AllStar
> nodes
> > cannot have hang time.
> >
> > On Wed, Feb 1, 2017 at 1:10 PM, Mark P <desertmansd at gmail.com> wrote:
> >
> >> Tim, the hang also occurs when someone is connected via dongle or dvap
> to
> >> the XRF module that talks to the dstar channel driver.
> >>
> >> 73
> >> Ted
> >>
> >> On Feb 1, 2017 12:45 PM, "Tim Sawyer" <tisawyer at gmail.com> wrote:
> >>
> >>>  It's probably your Dstar repeater hang time plus the hang time of the
> >>> analog Repeater's.  I'm assuming you probably have a mobile (node
> 29941)
> >>> listening to the Dstar repeater. If that is the case there is no
> AllStar
> >>> solution for this. You have to remove the hang timer from the D star
> >>> machine or mask it with PL if there is such a thing on Dstar.
> >>>
> >>> On Wed, Feb 1, 2017 at 12:17 PM "Mark P via arm-allstar" <
> >>> arm-allstar at hamvoip.org> wrote:
> >>>
> >>>> A brief description of our system befoer I ask the question. We (PAPA
> >>>> system) have several allstar nodes, 29941 dstar channel, 29926
> Echolink,
> >>>> 29940 IRLP and 40685 <-->43626 where our RTCMs are connected and that
> >>>> serves as node that we tie all the other nodes to. Allstar is install
> on
> >>>> the same physical system that we have XRF012 running on so that we can
> >>>> tie
> >>>> our analog system to dstar and other things.
> >>>>
> >>>> It seems we have an unusually long hange time (8 sec) on our analog
> >>>> repeaters whenever there is any activity coming through on our node
> >>>> 29941
> >>>> from dstar. We don't experience this whenever there is activity on the
> >>>> other nodes. What setting in asterisks can I change to decrease the
> hang
> >>>> time? Below is another clairification on how the nodes are connected.
> >>>>
> >>>> analog repeaters---->43626<-->40685<-->29941---->dstar
> >>>>
> >>>> Any help would be greatly appreciated.
> >>>>
> >>>> 73
> >>>> Ted
> >>>> W6SAT
> >>>> _______________________________________________
> >>>>
> >>>> arm-allstar mailing list
> >>>> arm-allstar at hamvoip.org
> >>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>>
> >>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >>>>
> >>> --
> >>> --
> >>> Tim
> >>>
> >>
> >
> >
> > --
> > --
> > Tim
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>



-- 
--
Tim