[arm-allstar] Nagios Client Packages?

[Lee Woldanski]

Ok, here is an update to close the loop.

I have Nagios running on a server on our network, so all I wanted to do is
be able to check my Allstar Pi, make sure it is alive, and make sure
Asterisk is running. That calls for getting NRPE running on the Pi.

Basic how-to on getting this going...

Install the required packages from the available repository:
pacman -S monitoring-plugins nrpe


Edit /etc/nrpe/nrpe.cfg:

Add your Nagios server to the allowed hosts...
allowed_hosts=44.128.1.1,127.0.0.1

Need to set this to 1:
dont_blame_nrpe=1

If you want to check the hard disk (flash card) and make sure it isn't
getting full, hda1 isn't on dev/hda1, it is on mmcblk0p1... (just change
the /dev so that stock scripts can still check_hda1):
command[check_hda1]=/usr/lib/monitoring-plugins/check_disk -w 20% -c 10% -p
/dev/mmcblk0p1

Add a custom command down at the bottom to make sure one and only one
process called 'asterisk' is running:
command[check_asterisk]=/usr/lib/monitoring-plugins/check_procs -c 1:1 -C
asterisk

Save nrpe.cfg.


Edit /etc/openvpn/firewall and add:

### Allow all Internet traffic for Nagios
$IPTABLES -A INPUT -p tcp --dport 5666 -j ACCEPT

### Allow ICMP traffic from internet
$IPTABLES -A INPUT -p ICMP --icmp-type 8 -j ACCEPT

Run /etc/openvpn/firewall to re-load the firewall rules.


Edit /etc/rc.local and add:

# Start NRPE so Nagios can monitor us
/usr/bin/nrpe -c /etc/nrpe/nrpe.cfg -d

Start NRPE up, (/usr/bin/nrpe -c /etc/nrpe/nrpe.cfg -d).


Now, go to your Nagios server and create your necessary object config file
to monitor this new host. You can now use "check_command
 check_nrpe!check_asterisk" to check if Asterisk is running on the Pi.


Cheers!


Lee


On Sun, Dec 17, 2017 at 6:34 PM, "Don Backstrom AA7AU via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> On Sun 17-Dec-17 16:29, "Lee Woldanski via arm-allstar" wrote:
>
>> Has anyone got the Nagios client tools (nrpe) running on their Pi, yet?
>>
>
>         I have had an on-going instance of Nagios3 service running on
> Rasparian (Wheezy/Jesse) on a rPi (v1) for several years, monitoring a
> number of different switches/servers/services in different locations - and
> it really works great. It even includes some terrific internal monitoring
> on the PI itself (even for the original Pi-1 models).
>
>         While it's been on my to-do list, I have not yet attempted an
> install with the Hamvoip/Archlinux rPi3 so I can't add much to your
> specific question. I will be *very* interested in what others have to add
> in response to your question. Also it's on my list to use for my new AREDN
> MeshNet proof-of-concept system.
>
>         In general, Nagios3 is a terrific add-on and well worth the effort
> to configure/install as a linux-based service.
>
>         Cheers,
>
>         - Don - AA7AU
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>



-- 
Lee Woldanski, AScT
VE7FET