[arm-allstar] dtmf tones

[Chris Viningre]

Hal,

I have the same setup on one of my nodes and have experience the same problem. I found the volume control is very touchy. I set simpleusb at 500 and use the volume control to set my audio between 3 and 5. Then I put a dab of hot glue on the knob to keep it there.   

Sent from Mail for Windows 10

From: HAL Fisher via arm-allstar 
Sent: Monday, August 28, 2017 4:41 AM
To: arm-allstar at hamvoip.org
Cc: HAL Fisher
Subject: [arm-allstar] dtmf tones

Hi,


I setup an IC2100h with a URI and pi3 I have a cor signal and am using the mic from the rj45 and ext speaker  for my inputs and ptt. I cannot get the DTMF tones to execute they are being seen by the asterisk client but not executing. 


When I  enter  the commands


RPT FUN <nodemname> <*81> or any command it will execute them manually.


I have changed the audio input levels every 100 -999 

I have also pre and de emphasized it  with no luck.


What am I missing???


is there any clue 


Thanks

Hal
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org