[arm-allstar] No Call Signs on Smartphone Echlink App.

[Doug Crompton]

Steve,

  There is a config setting for this in rpt.conf. Here are the docs:

http://docs.allstarlink.org/drupal/node/126


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Wed, Aug 23, 2017 at 9:25 PM, "Steve via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> This may not be the place to ask this question but i don’t know were else
> I can go.
>
> Last night I used my hamvoip/AllStar powered Echolink node for the first
> time on a net held on our repeater.
>
> During the net I noticed 5 others who had signed in and used the Echolink
> node and it worked very well.
>
> On the Echolink Android app the users were depicted by what I think is
> their Echolink node name, not their call sign as I remember it did
> previously.
>
> How can I get the users to be listed by their call signs on the Android
> app?
>
> The only thing I can think of is that we do not know the AllStar password
> for our repeater call sign so had to skip that on the initial hamvoip setup
> script. AllStar was set up long ago by someone who isn’t around any more so
> we can’t get the password, we can’t use the password reminder because we
> have no idea what email he used and the AllStar admin won’t reply to my
> emails. Could the fact that hamvoip does not have the AllStar password
> result in the node names being displayed on the smartphone app?
>
> Thank you for any advice.
>
> 73
> Steve
> KD9AER
>
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org