[arm-allstar] New Node On the Air With Questions

[Dave Sheppard]

Thanks Doug. It was the de-emphasis setting.

73
Dave
W2PAX

> Message: 4
> Date: Sat, 22 Apr 2017 14:18:17 -0400
> From: Doug Crompton <wa3dsp at gmail.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] New Node On the Air With Questions
> Message-ID:
> 	<CAMp6vst-TZeg0cXQU6A6OvoBrbguOAhg_2tfSaCOJ+vPx8hx8w at mail.gmail.com>
> Content-Type: text/plain; charset=UTF-8
> 
> Dave,
> 
>  If you are not seeing response or seeing poor or error response from
> entered DTMF tones on the client screen the problem is usually always one
> of two things. Either your rx level is not set correctly - item 2 on the
> simpleusb-tune-menu screen or you do not have deemphasis set correctly.
> Again the setting is in simpleusb-tune-menu.
> 
> Make sure you check several input radios as it is possible the
> transmitting radio has bad DTMF. The Baofengs need a setting as they do
> not mute the speaker and it feeds back to the mic. See-
> 
> https://kk6jyt.com/sending-accurate-baofeng-dtmf-tones-from-the-uv-5r/
> 
> *73 Doug*
> 
> *WA3DSP*
> 
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>