[arm-allstar] DMK URI Connection

[Justin Reed]

I'm not using a pull-up on the GE Phoenix-S I'm using. It goes low active.

When connecting to a repeater controller port you need pull-up voltage. The 7330 has jumpers to select pull-up. 

Regards,
Justin

"Real programmers use vi. That's why I use nano."

> On Apr 8, 2017, at 7:48 PM, Maurice Dake via arm-allstar <arm-allstar at hamvoip.org> wrote:
> 
> Have a question to those that are using the DMK URI.  Some where I read that you need to use pull up resistors on the PTT connection.  My transceiver requires a connection to ground for PTT, so I am assuming that I need a pull up resistor between +5V line and PTT.  
> 
> Do I also need a pull up on the COS line?  I will be using a data connector SQL line output which go +5V high with squelch open.  Hope this makes sense to those that have built a interconnecting cable from URI to radio data port.
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org