[arm-allstar] usb reset issue
Devan Phillis
devan at kd8mst.org
Sat Sep 17 00:29:57 EST 2016
Doug, that is one of my fobs..... tested to be working when i shipped. I
have seen this happen a couple times and i have found that most of the time
it has to do with power to the radio for some reason. When there isnt
enough power supplied to the radio it resets and makes the pi think the fob
was unplugged an plugged back in. Bryan, did you order a standard battery
as well as the eliminator? If so try charging the battery and using it for
starters. If not then try to find a usb power supply that supplies 2A and
use it. If the problem continues then i will be glad to refund you your
money or replace the radio and fob for another.
Devan KD8MST
On Sep 17, 2016 1:20 AM, <arm-allstar-request at hamvoip.org> wrote:
Send arm-allstar mailing list submissions to
arm-allstar at hamvoip.org
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
or, via email, send a message with subject or body 'help' to
arm-allstar-request at hamvoip.org
You can reach the person managing the list at
arm-allstar-owner at hamvoip.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of arm-allstar digest..."
Today's Topics:
1. USB reset issue (Bryan St Clair)
2. Re: USB reset issue (Roselito de los Reyes)
3. Re: USB reset issue (Doug Crompton)
----------------------------------------------------------------------
Message: 1
Date: Fri, 16 Sep 2016 21:30:34 -0700
From: Bryan St Clair <bryan at k6cbr.us>
To: ARM Allstar <arm-allstar at hamvoip.org>
Subject: [arm-allstar] USB reset issue
Message-ID:
<CAH5oE6az3Lkc3Qo2ruLosVmVSGfJ1L6fb7C6xD-TmzxSuEdGUg at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
Hello all,
I have a new node up and am using an 888 with modified FOB.
Just received the radio and have it online tonight, but notice after about
20 mins of use, I was missing parts of the conversation.
Radio stayed online and not was solid....not packet loss. When I logged
into the console to see what was happening, I saw this:
[Sep 16 21:20:58] WARNING[1457]: chan_simpleusb.c:2903 simpleusb_read:
Possibly stuck USB read channel. [usb]
== Set device 1-1.4:1.0 to usb
[Sep 16 21:20:59] WARNING[1459]: chan_simpleusb.c:1670 hidthread: Loaded
parameters from simpleusb_tune_usb.conf for device usb .
[Sep 16 21:20:59] WARNING[1457]: chan_simpleusb.c:2903 simpleusb_read:
Possibly stuck USB read channel. [usb]
[Sep 16 21:20:59] WARNING[1457]: chan_simpleusb.c:2911 simpleusb_read:
Nope, USB read channel [usb] wasn't stuck after all.
-- Hungup 'DAHDI/pseudo-203191'
-- Hungup 'DAHDI/pseudo-141004'
-- Hungup 'DAHDI/pseudo-534356'
== Set device 1-1.4:1.0 to usb
[Sep 16 21:21:12] WARNING[1459]: chan_simpleusb.c:1670 hidthread: Loaded
parameters from simpleusb_tune_usb.conf for device usb .
[Sep 16 21:21:12] WARNING[1457]: chan_simpleusb.c:2903 simpleusb_read:
Possibly stuck USB read channel. [usb]
[Sep 16 21:21:13] WARNING[1457]: chan_simpleusb.c:2911 simpleusb_read:
Nope, USB read channel [usb] wasn't stuck after all.
-- Hungup 'DAHDI/pseudo-429511028'
I get about 10 seconds of sound then a usb reset. Repeating messages.
I have performed another usb config, to check settings.. but same result.
I can hear the node and I can transmit clearly when connected.
(If I should be asking for help on a different list for this type of issue,
please inform me of that list name, thank you.)
--
Bryan aka K6CBR
www.k6cbr.us
QRZ <http://www.qrz.com/db/K6CBR>
43913
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/
attachments/20160916/46a33ca9/attachment-0001.html>
------------------------------
Message: 2
Date: Sat, 17 Sep 2016 04:42:19 +0000
From: Roselito de los Reyes <tolitski at hotmail.com>
To: ARM Allstar <arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] USB reset issue
Message-ID:
<BY1PR02MB1259745DBB8D471E6BBDAA59D4F20 at BY1PR02MB1259.
namprd02.prod.outlook.com>
Content-Type: text/plain; charset="us-ascii"
Looks like your USB cable or USb connection between the URI and into the Pi
is loose.
Best regards,
Roselito De Los Reyes
On Sep 16, 2016, at 9:31 PM, Bryan St Clair via arm-allstar <
arm-allstar at hamvoip.org<mailto:arm-allstar at hamvoip.org>> wrote:
Hello all,
I have a new node up and am using an 888 with modified FOB.
Just received the radio and have it online tonight, but notice after about
20 mins of use, I was missing parts of the conversation.
Radio stayed online and not was solid....not packet loss. When I logged
into the console to see what was happening, I saw this:
[Sep 16 21:20:58] WARNING[1457]: chan_simpleusb.c:2903 simpleusb_read:
Possibly stuck USB read channel. [usb]
== Set device 1-1.4:1.0 to usb
[Sep 16 21:20:59] WARNING[1459]: chan_simpleusb.c:1670 hidthread: Loaded
parameters from simpleusb_tune_usb.conf for device usb .
[Sep 16 21:20:59] WARNING[1457]: chan_simpleusb.c:2903 simpleusb_read:
Possibly stuck USB read channel. [usb]
[Sep 16 21:20:59] WARNING[1457]: chan_simpleusb.c:2911 simpleusb_read:
Nope, USB read channel [usb] wasn't stuck after all.
-- Hungup 'DAHDI/pseudo-203191'
-- Hungup 'DAHDI/pseudo-141004'
-- Hungup 'DAHDI/pseudo-534356'
== Set device 1-1.4:1.0 to usb
[Sep 16 21:21:12] WARNING[1459]: chan_simpleusb.c:1670 hidthread: Loaded
parameters from simpleusb_tune_usb.conf for device usb .
[Sep 16 21:21:12] WARNING[1457]: chan_simpleusb.c:2903 simpleusb_read:
Possibly stuck USB read channel. [usb]
[Sep 16 21:21:13] WARNING[1457]: chan_simpleusb.c:2911 simpleusb_read:
Nope, USB read channel [usb] wasn't stuck after all.
-- Hungup 'DAHDI/pseudo-429511028'
I get about 10 seconds of sound then a usb reset. Repeating messages.
I have performed another usb config, to check settings.. but same result.
I can hear the node and I can transmit clearly when connected.
(If I should be asking for help on a different list for this type of issue,
please inform me of that list name, thank you.)
--
Bryan aka K6CBR
www.k6cbr.us<http://www.k6cbr.us>
QRZ<http://www.qrz.com/db/K6CBR>
43913
_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org<mailto:arm-allstar at hamvoip.org>
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB and RPi2 web page - http://hamvoip.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/
attachments/20160917/fd52f6f8/attachment-0001.html>
------------------------------
Message: 3
Date: Sat, 17 Sep 2016 01:20:43 -0400
From: Doug Crompton <doug at crompton.com>
To: ARM Allstar <arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] USB reset issue
Message-ID: <BLU171-W14F4B2E19C200C9774FE10BAF20 at phx.gbl>
Content-Type: text/plain; charset="iso-8859-1"
Hard to say exactly what this is. It could be a bad FOB or cable. What FOB
are you using? Did you modify the FOB? You are using carrierfrom=usb in
simpleusb.conf??? That is what the 888 requires. Are you getting a courtesy
tone when you unkey? Have you changed anything else parameter wise? What
version of the code are you using?
73 Doug
WA3DSP
http://www.crompton.com/hamradio
Date: Fri, 16 Sep 2016 21:30:34 -0700
To: arm-allstar at hamvoip.org
Subject: [arm-allstar] USB reset issue
From: arm-allstar at hamvoip.org
CC: bryan at k6cbr.us
Hello all,
I have a new node up and am using an 888 with modified FOB.
Just received the radio and have it online tonight, but notice after about
20 mins of use, I was missing parts of the conversation.
Radio stayed online and not was solid....not packet loss. When I logged
into the console to see what was happening, I saw this:
[Sep 16 21:20:58] WARNING[1457]: chan_simpleusb.c:2903 simpleusb_read:
Possibly stuck USB read channel. [usb]
== Set device 1-1.4:1.0 to usb
[Sep 16 21:20:59] WARNING[1459]: chan_simpleusb.c:1670 hidthread: Loaded
parameters from simpleusb_tune_usb.conf for device usb .
[Sep 16 21:20:59] WARNING[1457]: chan_simpleusb.c:2903 simpleusb_read:
Possibly stuck USB read channel. [usb]
[Sep 16 21:20:59] WARNING[1457]: chan_simpleusb.c:2911 simpleusb_read:
Nope, USB read channel [usb] wasn't stuck after all.
-- Hungup 'DAHDI/pseudo-203191'
-- Hungup 'DAHDI/pseudo-141004'
-- Hungup 'DAHDI/pseudo-534356'
== Set device 1-1.4:1.0 to usb
[Sep 16 21:21:12] WARNING[1459]: chan_simpleusb.c:1670 hidthread: Loaded
parameters from simpleusb_tune_usb.conf for device usb .
[Sep 16 21:21:12] WARNING[1457]: chan_simpleusb.c:2903 simpleusb_read:
Possibly stuck USB read channel. [usb]
[Sep 16 21:21:13] WARNING[1457]: chan_simpleusb.c:2911 simpleusb_read:
Nope, USB read channel [usb] wasn't stuck after all.
-- Hungup 'DAHDI/pseudo-429511028'
I get about 10 seconds of sound then a usb reset. Repeating messages.
I have performed another usb config, to check settings.. but same result.
I can hear the node and I can transmit clearly when connected.
(If I should be asking for help on a different list for this type of issue,
please inform me of that list name, thank you.)
--
Bryan aka K6CBRwww.k6cbr.usQRZ43913
_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB and RPi2 web page - http://hamvoip.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/
attachments/20160917/e0ebc715/attachment.html>
------------------------------
Subject: Digest Footer
_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
------------------------------
End of arm-allstar Digest, Vol 28, Issue 29
*******************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160917/29129c6e/attachment-0001.html>
More information about the arm-allstar
mailing list