[arm-allstar] More on Zoiper on the iphone

[Dave Miller]

Thanks Mark and Dave.
Dave
VE7HR

On Sat, Sep 10, 2016 at 3:03 PM, Mark Johnston via arm-allstar <
arm-allstar at hamvoip.org> wrote:

> That appears to be for Windows OS - PC
>
> 1. Introduction Zoiper holds its configuration in an XML file with UTF-8
> encoding. The file is called 'Config.xml' and is located in the
> %APPDATA%\Zoiper folder. (This usually translates to 'C:\Documents and
> Settings\Current Windows user\Application Data\Zoiper'. ) This document
> explains the structure and the tags used in the Zoiper configuration file.
>
> I am not aware of a way to access the file system on iOS without a jail
> break, either.
>
>
>
> "Got Root?"
>
> How many software engineers does it take to change a light bulb?
> *None. It's a hardware problem.*
>
>
> Unix is user friendly. It's just very particular about who it's friends
> are.
> WINDOWS: Will Install Needless Data On Whole System
> MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools
> Teenagers.
>
>
> A ntennas
> P oorly
> P laced
> L acks
> E ngineering
>
> The best way to accelerate a computer running Windows is at 9.81 m/s².
>
> *"I get paid to support Windows, I use Linux to get work done."*
>
>
> On Sat, Sep 10, 2016 at 2:54 PM, David McGough via arm-allstar <
> arm-allstar at hamvoip.org> wrote:
>
>>
>> Hi Dave,
>>
>> Hum...I don't know and don't have an iPhone to test with.
>>
>> If you can get to the actual XML configuration file, the manual suggests
>> there are level settings.  See the "audio" section of this document:
>>
>> http://www.zoiper.com/documentation/Zoiper_3_Configuration_File.pdf
>>
>> I have no idea if any of this info will help---just shooting in the dark!
>>
>> 73, David KB4FXC
>>
>>
>>
>> On Sat, 10 Sep 2016, Dave Miller via arm-allstar wrote:
>>
>> > Dave,
>> > I can't seem to find these setting you are talking about in Zoiper for
>> > iPhone?
>> > I would love to boost audio as well.
>> > The settings tab under Audio has 5 items
>> > Echo cancellation             set to software
>> > Automatic Gain Control    set to software
>> > 3 on off toggles
>> > Noise suppression software
>> > Dialpad sounds
>> > Ring while talking.
>> >
>> > Where is "Zoiper->Config->Audio" on a iphone.
>> >
>> > Thanks
>> > Dave
>> > VE7HR
>> >
>> >
>> > On Sat, Sep 10, 2016 at 2:11 PM, David McGough via arm-allstar <
>> > arm-allstar at hamvoip.org> wrote:
>> >
>> > >
>> > > Hi Tom,
>> > >
>> > > Glad it's working.
>> > >
>> > > Since the volume level issue is with Zopier directly, Zopier would
>> ideally
>> > > be the best place for a wider range volume adjustment method, rather
>> than
>> > > Asterisk, in this scenario.
>> > >
>> > > For my curiosity, I just google'd some phrases similar to: "zopier low
>> > > volume" and low volume levels seem to be common complaints. Some
>> comments
>> > > mention looking through the Zopier settings, such as:
>> > >
>> > > ..."There is a speaker gain option in Zoiper->Config->Audio, which
>> you can
>> > > try. Another option in the same menu is the "Audio Driver". Speaker
>> gain
>> > > should do the trick, but try both, do some tests with them to see
>> which
>> > > will have better effect with your device."...
>> > >
>> > > 73, David KB4FXC
>> > >
>> > >
>> > >
>> > > On Sat, 10 Sep 2016, Tom Whiteside via arm-allstar wrote:
>> > >
>> > > > I was able to finally get Zoiper to properly register with my
>> Allstar
>> > > node -
>> > > > the final piece of the puzzle was to change the iax.conf "host="
>> line to
>> > > > dynamic as the example code had to start with.   Got confused
>> thinking
>> > > this
>> > > > should be an actual IP address given it was a public static IP
>> address -
>> > > > that was WRONG!
>> > > >
>> > > >
>> > > >
>> > > > Still wishing I could raise the volume on the iPhone Zoiper app in
>> > > speaker
>> > > > mode.  (Not an issue with Bluetooth car usage.)  This link gives an
>> > > example
>> > > > of adding a volume statement to the dial definition in
>> extensions.conf:
>> > > >
>> > > >
>> > > >
>> > > > http://www.withsupport.co.uk/wiki/increasing-sip-volume-
>> > > freepbxasteriskelast
>> > > > ixtrixbox
>> > > >
>> > > >
>> > > >
>> > > > exten => s,1,Set(VOLUME(TX)=4)            ;can be any integer from
>> 0 to
>> > > 10
>> > > >
>> > > > exten => s,1,Set(VOLUME(RX)=4)            ;can be any integer from
>> 0 to
>> > > 10
>> > > >
>> > > >
>> > > >
>> > > > Tried that but with asterisk -rvvv monitoring, it reports "VOLUME
>> not
>> > > > registered" so looks like this is not supported in our version.
>> > > >
>> > > >
>> > > >
>> > > > Any ideas on this?
>> > > >
>> > > >
>> > > >
>> > > > Tom N5TW
>> > > >
>> > > >
>> > > >
>> > > >
>> > > >
>> > > >
>> > >
>> > > _______________________________________________
>> > >
>> > > arm-allstar mailing list
>> > > arm-allstar at hamvoip.org
>> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> > >
>> > > Visit the BBB and RPi2 web page - http://hamvoip.org
>> > >
>> >
>>
>> _______________________________________________
>>
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2 web page - http://hamvoip.org
>>
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160910/045562ee/attachment-0001.html>