[arm-allstar] RPi3 No boot

[Rick Wilson]

Format the sd and copy them over again.  It is either the wrong file system type or primary/secondary partition type is wrong.  Anyway it fix d it for me.

--
Rick , wd5etd

> On Oct 3, 2016, at 10:07 AM, Danny de Bont via arm-allstar <arm-allstar at hamvoip.org> wrote:
> 
> Hi,
> 
> I have downloaded the RPi2/3 image file (RPi2-3_V1.02beta_Allstar.img.zip) from www.hamvoip.org and burned it via dd in Linux onto a Sandisk 16GB SD card.
> 
> I can see that the files are there but the image does not boot. I do not have a monitor or keyboard connected to the RPi3 (as I normally access my Pi's via SSH). My DHCP server (on Debian 8.1) works just fine.
> 
> Any pointers?
> 
> Danny
> ZS6XOX
> 73's
> 
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2 web page - http://hamvoip.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20161003/a61dbe43/attachment.html>