[arm-allstar] LAN connection?

[Jan van der Vyver]

Hi

 

In short yes it can.

 

Good guidance  http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/multi-server%20howto.pdf

 

You have to configure the nodes section in the rpt.conf files to point to each other.

 

example “

[nodes]

; Note, if you are using automatic update for Allstar link nodes,

; no Allstar link nodes should be defined here. Only place a definition

; for your local nodes, and private (off of Allstar link) nodes here.

40001 = radio at 127.0.0.1/40001,NONE

40000 = radio at 192.168.1.101:4569/40000,NONE<<<< IP and port of other local server”

 

Regards

 

Jan van der Vyver

ZS1VDV

 

 

From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of Colin Goodson via arm-allstar
Sent: Monday, 03 October 2016 5:36 AM
To: ARM Allstar <arm-allstar at hamvoip.org>
Cc: Colin Goodson <jcolingoodson at gmail.com>
Subject: [arm-allstar] LAN connection?

 

Can an allstar-like connection between 2 rpi exist without an actual internet connection?
I am looking to set up a point to point 2.4ghz link and have 2m radios as the bases.  If so, a little guidance on how to configure the nodes would be appreciated.  
Thanks,
Colin
KC1FKU

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20161003/53408a97/attachment.html>