[arm-allstar] Need some troubleshooting help with Allstar/RPi2/888 w/ FOB

[Doug Crompton]

Jason,

  It could be a misconfiguration in simpleusb.conf  -  Give me a little
more info. Was this purchased from Devan, KD8MST?  On the 888 and direct
wired sound FOB he modified he left out the PTT keying transistor or FET.
This meant that instead of  invertptt=0 it would be invertptt=1  in
simpleusb.conf. If it was set wrong the radio would be keyed most of the
time - red light on. If this is the case then change that in simpleusb.conf
and reboot.


Get back to me with a little more info on the history of the radio. Also if
you need personal help we can get together on the phone if you like.



*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Mon, Nov 21, 2016 at 10:43 PM, Jason Frisbee via arm-allstar <
arm-allstar at hamvoip.org> wrote:

> I'm trying to set up a node on a RPi2 with a Baofeng 888 my dad bought with
> a USB FOB already wired in, running through the first time setup menus.
> After several attempts (learning how to set up the radio, AllStar login,
> etc), the only audio I get from the setup is the flash option in
> simpleusb-tune-menu. With the scripts, AllStar will connect to a hub for
> the WinSystem, but no sound. Does this point to Asterisk being
> misconfigured?
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>