[arm-allstar] GE master II

Roselito de los Reyes tolitski at hotmail.com
Fri May 27 11:55:04 EST 2016


Thanks Doug.

To: arm-allstar at hamvoip.org
Date: Fri, 27 May 2016 12:37:37 -0400
Subject: Re: [arm-allstar] GE master II
From: arm-allstar at hamvoip.org
CC: doug at crompton.com




Roselito,

     Depending on how much additional gain you need you may be able to run that URI on 5V. Give it a try it is easier because it is just jumper on the 25 pin connector. Jumper goes from pin 14 to pin 25.
http://dmkeng.com/images/URIx%20Schematic.pdf

73 Doug
WA3DSP
http://www.crompton.com/hamradio


To: arm-allstar at hamvoip.org
Date: Fri, 27 May 2016 07:10:00 -0700
Subject: Re: [arm-allstar] GE master II
From: arm-allstar at hamvoip.org
CC: tolitski at hotmail.com




After looking at the setup my friend had, the cable maker forgot to provide 12V to the 2x amplifier.They're going to fix this tomorrow and will see what will happen.
73
Lito de KK6OOS

Date: Thu, 26 May 2016 10:36:20 -0700
To: arm-allstar at hamvoip.org
Subject: Re: [arm-allstar] GE master II
From: arm-allstar at hamvoip.org
CC: kk6ecm at gmail.com

Correct. This radio requires a TS-32 or similar add-on to generate these two signals. I can provide the requested info, but it will take me a few days to pull it together. 

Thanks,Bobk6ecm73
Sent from iPad

On May 26, 2016, at 10:13 AM, Doug Crompton via arm-allstar <arm-allstar at hamvoip.org> wrote:




Roselito,

     Perhaps others will have input but the only reason I can think of that it would not work is if the repeater did not have internal PL and a COS signal indication line coming out.
73 Doug
WA3DSP
http://www.crompton.com/hamradio


> Date: Thu, 26 May 2016 09:43:51 -0700
> To: arm-allstar at hamvoip.org
> Subject: [arm-allstar]  GE master II
> From: arm-allstar at hamvoip.org
> CC: tolitski at hotmail.com
> 
> Good morning!
> 
> I was told that simpleusb does not work with this repeater. Is this true? Can someone share the harness pinout for a full duplex configuration and the simpleUSB settings associated with the setup.
> 
> Thanks and 73
> 
> Roselito De Los Reyes
> 
> Kk6oos
> > 
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2 web page - http://hamvoip.org
> 
 		 	   		  
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  

_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  

_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160527/69ec8b4a/attachment-0001.html>


More information about the arm-allstar mailing list