[arm-allstar] Conditionally ignoring tone qualifier to key repeatermore quickly

[Neil k8it]

I have built a custom interface for the DR1X. See Yaesu System Fusion under 
'AME Auto Mode Emulation for a photo and then connect to my node 41838 or 
Echolink k8it-L
Thanks
73 Neil Sablatzky  K8IT
Allstar Node 41838 KITLINK
Allstar Node 42087 KITLINK HUB
IRLP Node exp0068
Echolink K8IT-L
WIRES-X K8IT 11479 Room 21479

--------------------------------------------------
From: "Tom Whiteside via arm-allstar" <arm-allstar at hamvoip.org>
Sent: Wednesday, May 18, 2016 1:51 PM
To: <arm-allstar at hamvoip.org>
Cc: "Tom Whiteside" <tomw at ecpi.com>
Subject: [arm-allstar] Conditionally ignoring tone qualifier to key 
repeatermore quickly

> Our previous controller/repeater was much faster at keying the repeater 
> than our Yaesu DR-1X which has about 1/4 seconds of delay all waiting for 
> the tone validation.
>
> Some controllers implement an algorithm that will "trust" that the tone 
> will become valid if a key up occurs within a short time (like 4 seconds) 
> from a previously tone qualified transmission.  This has to have the 
> smarts to disable itself temporarily during band openings or other 
> transmissions without the proper tone.
>
> This would be especially helpful during our ARES nets that can have 50+ 
> check-ins.
>
> There are so many provisions provided for in your Allstar system, thought 
> I'd ask if there was a way to do this before embarking on an external PIC 
> project to accomplish this.
>
> Tom N5TW
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2016.0.7597 / Virus Database: 4568/12253 - Release Date: 05/18/16
>