[arm-allstar] re App_rpt recompile for rxnotch

[Brett Friermood]

Having the output tone follow the input tone, and transmitting IDs with no
tone works to keep the repeater quiet when the link is already quiet.

However, if the link is active with traffic and needs to force an ID to
remain legal the rx notch filter would remove the transmitted ID so it
would not be mixed with the operators voice.

Brett KQ9N
On May 12, 2016 8:19 AM, "Doug Crompton via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Duane,
>
>  My confusion was that we are NOT DIAL nor associated with it. You seem to
> make that connection. It turns out that the notch code dates way back but
> has not been implemented in awhile. It requires a great deal of CPU to
> perform and would probably be detrimental to use on the small boards. It
> also is part of app_rpt not usb radio my mistake.
>
> Our updated channel driver in the upcoming version 2.0 will have the
> capability to do audio processing so that would replace any former notch
> code and be tremendously more efficient.
>
> In the meantime If you have access I would try to implement the method I
> suggested of have the remote PL on input only to eliminate tail ID's. It
> would be a much cleaner way to do it if it would work for you.
>
>
>
> *73 DougWA3DSPhttp://www.crompton.com/hamradio
> <http://www.crompton.com/hamradio>*
>
>
> ------------------------------
> Date: Thu, 12 May 2016 08:37:42 -0400
> To: arm-allstar at hamvoip.org
> Subject: [arm-allstar] re App_rpt recompile for rxnotch
> From: arm-allstar at hamvoip.org
> CC: selkie2 at comcast.net
>
> Thanks for the feedback Doug. I was following your instructions for
> setting up my R-Pi2 as a node using the 1.01 image. The image has different
> file locations than DIAL references for finding the rxnotch.c to include.
> Because of that, I asked the question as to how to recompile THIS version
> of DIAL as I can't find what I need on the image. I came to the list to ask
> about this VERSION of DIAL. This is NOT about USBAUDIO true, but I needed
> help with the modified version referenced on your site.
> Sorry for stepping on toes. I'll contact the list when I have SPECIFIC
> USBAUDIO issues.
> 73,
> Duane KA1LM
>
> _______________________________________________ arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the
> BBB and RPi2 web page - http://hamvoip.org
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160512/ef8deccb/attachment.html>