[arm-allstar] Recompiling app_rpt for rxnotch

[Doug Crompton]

Duane,

 You are on the wrong list for DIAL. We generally only do simpleusb and currently only suggest its use with our code. The best way to handle ID's on repeaters or links is to have the output PL follow the input PL. ID's would be transmitted without PL and not heard by the other end using 
PL on receive. This is also a good way to connect Allstar to a repeater when there is no Internet at the repeater site. It is half duplex but it works.
73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Wed, 11 May 2016 15:29:32 -0400
To: arm-allstar at hamvoip.org
Subject: [arm-allstar] Recompiling app_rpt for rxnotch
From: arm-allstar at hamvoip.org
CC: selkie2 at comcast.net

I am running RPi2 Image - http://hamvoip.org/RPi2/RPi2_V1.01_Allstar.img.zip
I would like to turn on the rx notch function to block CWIDs from my UHF backhaul links. I have instructions as to how to recompile for DIAL, but can't find the notch.c file to include in the recompile. Can someone list how to recompile for rxnotch?Thanks,Duane KA1LM   #42996

_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160511/9df654e8/attachment.html>