[arm-allstar] Allstar on an HT

Stanley Stanukinos ka5iid at swbell.net
Sun Mar 20 13:33:23 EST 2016


Dan, the issue is the audio out of the speaker is normally PL filtered and without the high frequency noise as well the DSP squelch will not work as as well. 

Stan

Sent from my iPhone

> On Mar 20, 2016, at 1:26 PM, Dan Ozment via arm-allstar <arm-allstar at hamvoip.org> wrote:
> 
> No, Chuck, you simply know how to find what you're looking for!    I found
> this in some documentation on allstarlink.org
> 
> Receiver with audio coming directly from the output of the discriminator:
> carrierfrom=dsp
> ctcssfrom=dsp
> rxdemod=flat
> 
> But, is that saying I have to tap the audio at the discriminator?  I was
> hoping to get it directly from the external speaker jack without digging
> into the radio.   If it will work from there it may be the answer I was
> looking for.  
> 
> Thanks for the suggestion.  I will explore while I wait for others to
> respond.
> 
> Dan
> 
> 
> 
> -----Original Message----- 
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Cc: Chuck Kelsey <wb2edv at roadrunner.com>
> Subject: Re: [arm-allstar] Allstar on an HT
> 
> Maybe I'm all wet, but isn't there a DSP mode  - then you don't need COS or
> a PL decode output.
> 
> Chuck
> WB2EDV
> 
> 
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2 web page - http://hamvoip.org


More information about the arm-allstar mailing list