[arm-allstar] Help For A Newbie???

[Dan Ozment]

Thanks, Doug!  I ran simpleusb-tune and adjusted the levels.  The transmit
level  sounds much better.  Had to set it all the way down to about 75 or
so.   Receive level is up around 900 to even get the level to ever make it
half way to 3KHz.  

 

I'm hit or miss with getting the scripts to play anything when I run them
manually.  I think the USB device must be disconnecting or I'm doing
something I shouldn't be doing.  I've run the sayip.sh script and hear
nothing.  I unplug the URI and leave it out for a few seconds.  Then, plug
it back in and I get the sayip.sh audio.  

I haven't been able to send a command from the radio.  Either that or I
don't know what I'm doing, again!   

I'm sending *80 from an HT.  Simpleusb is decoding it accurately.  But, I
don't get a response.  Again, thanks for your help.

 

73

Dan

W4DTO 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160312/54a13715/attachment-0001.html>