[arm-allstar] Private node timeout

[Doug Crompton]

Lito,

 I don't think this has anything to do with it being a private node. It is just a TX timeout which is set by totimeout in rpt.conf. Default is 300000 mS  which is 5 minutes. It you are transmitting longer than that it will timeout. By transmitting it would mean COS true for longer than that time then you would get the message. You can change the timeout value or just not transmit that long. Typically a transmission should be less than 3 minutes to eliminate downstream repeater timeouts.
73 Doug
WA3DSP
http://www.crompton.com/hamradio


To: arm-allstar at hamvoip.org
Date: Wed, 9 Mar 2016 12:15:54 -0800
Subject: [arm-allstar]  Private node timeout
From: arm-allstar at hamvoip.org
CC: tolitski at hotmail.com




Hello Gents,
I created an experimental private pi node and connected it to my hub. After talking on it for sometiime.. I get an announcement 
"node 1968 timeout".
Any ideas on where I should start?
Lito KK6OOS 		 	   		  

_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160309/3f92a7fa/attachment-0001.html>