[arm-allstar] Echolink Time Out ?

[James Nessen]

Is your public IP address changing?  This would cause the behavior you are seeing.

Jim, K6JWN

> On Jun 27, 2016, at 9:19 PM, Bob Prybyzerski via arm-allstar <arm-allstar at hamvoip.org> wrote:
> 
> It is through a Netgear router. Pi has a static local IP address. It doesn't always happen but has happened on the past two nets we were connected to. 
> Not sure what conference software they use. Conference is *AB2M*. 
> 
> It seems like a glitch in our network that doesn't recover. 
> 
> After reconnecting tonight,it was fine for the rest of the net, about 1 1/2 hours. 
> 
> Weird. Just curious if there might be a workaround. 
> I'll keep monitoring. 
> 
> I did notice a lot of errors in the log for being unable to connect to Echolink server 5.  Not sure if that could be part of the problem. 
> 
> Thanks 
> 
> Bob W2YMM
> 
> 
> 
> Sent from my iPhone
> Bob Prybyzerski
> 631-960-1051
> W2YMM
> 
>> On Jun 27, 2016, at 11:50 PM, David McGough via arm-allstar <arm-allstar at hamvoip.org> wrote:
>> 
>> 
>> Hi Bob,
>> 
>> Are you running your RPi2 through a NAT router, or does it have a "live" 
>> IP address??
>> 
>> I've not personally seen the behavior you're describing, but, If you're
>> behind a "stateful" NAT firewall, that might be the problem.
>> 
>> Do you know what conference software is being used?
>> 
>> 73, David KB4FXC
>> 
>> 
>>> On Mon, 27 Jun 2016, W2YMM via arm-allstar wrote:
>>> 
>>> I was curious if anyone else who uses Echolink on their Allstar node ever
>>> experienced a problem like this...
>>> The Echolink node is connected to a Conference server then about 30-40
>>> minutes into a net Audio Stops being passed to the repeater from the
>>> Echolink stations, but the Allstar node still shows that it is connected.
>>> Issuing a disconnect then reconnecting brings the audio back.
>>> 
>>> I am using a Raspberry Pi2 with V1.01 code.
>>> Is there any kind of timer settings ?
>>> 
>>> The Allstar node is at a remote location with a link radio, So I can't see
>>> it physically when the problem occurs.
>>> We leave pauses and wait for the link radio to reset quite often.
>>> 
>>> Thanks
>>> Bob W2YMM
>> 
>> _______________________________________________
>> 
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2 web page - http://hamvoip.org
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2 web page - http://hamvoip.org