[arm-allstar] Stuck in TX

[Doug Crompton]

It sounds like you have  carrierfrom in simpleusb.conf set wrong on that image. By default the image is set to  carrierfrom=usbinvert meaning pin 8 has to go low to indicated receive. If you have duplex=2 in rpt.conf and pin 8 is active meaning low for carrierfrom=usbinvert or high for carrierfrom=usb then it will key the PTT.

1V for COS is not a good value. It should be above 2V or so on high and close to 0 volts on low (.5 or less). 
73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Mon, 20 Jun 2016 21:42:09 -0400
To: arm-allstar at hamvoip.org
Subject: [arm-allstar] Stuck in TX
From: arm-allstar at hamvoip.org
CC: N1XBM at amsat.org

I'm running an RPI2 with version 1.01 and using DMK URI. I'm trying to get up a repeater and I'm having an odd issue. As soon as everything loads up the red LED is stuck on. This is with nothing connected to the db25. I also measure 1 volt dc at pin 8. I thought maybe I had bad fob so I swapped it with another fob and I got the same thing.
I then took the fob and moved it to another RPI2 running the same image and it doesn't do it. I'm kinda chasing my tail here anyone know where to start or where to look? I must of fat fingerd something somewhere. 
N1XBM

Apparare Scientor

Paratus Communicare

Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657

www.radioguysrepeaternetwork.com

_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160620/4c040b64/attachment.html>