[arm-allstar] Raspberry Pi3 and two URI interfaces.

[Colin Goodson]

Telephone would certainly be easier.  207.266.7578 at your convenience.
I will image another 8gb card right now so we can start fresh.  Give that 5
min or so.

On Jul 30, 2016 6:12 PM, "Doug Crompton via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Colin,
>
>  Our image is very easy to setup.What node radio are you using? I would
> recommend not mixing older or other config files with ours at least not
> until you have it running. It should just come up and work. We use
> simpleusb by default which requires a COS line from the radio.
>
> What do you mean by timeout on receive? This is when the node radio is
> transmitting? Red light on the URI is lit?
>
> I would be glad to work with you on this if you want via telephone which
> is much easier. Let me know.
>
>
>
> *73 DougWA3DSPhttp://www.crompton.com/hamradio
> <http://www.crompton.com/hamradio>*
>
>
> ------------------------------
> Date: Sat, 30 Jul 2016 17:24:51 -0400
> To: arm-allstar at hamvoip.org
> Subject: Re: [arm-allstar] Raspberry Pi3 and two URI interfaces.
> From: arm-allstar at hamvoip.org
> CC: jcolingoodson at gmail.com
>
> Could anyone provide any pointers on setting up a pi3 and a URI?   I had
> the whole rig running with raspian all-star  and decided to try this
> version out for the WiFi functionality.  It communicates with the radio
> (cdm1250) on transmit, but when receiving seems to time out after a second
> or so.  I have been through the config a few times, using all default, and
> then trying some modified iterations.  Any help would be appreciated.
> Thanks,
> Colin
>
> On Jul 30, 2016 4:40 PM, "Doug Crompton via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> Yes, I didn't catch that. In your example you had both the pseudo and
> simpleusb drivers defined in the second node. you can only have one at a
> time.
>
> Each node could have a separate ID though. Using no extent.
>
>
>
> *73 DougWA3DSPhttp://www.crompton.com/hamradio
> <http://www.crompton.com/hamradio>*
>
>
> ------------------------------
> Date: Sat, 30 Jul 2016 14:38:25 -0400
> To: arm-allstar at hamvoip.org
> Subject: Re: [arm-allstar] Raspberry Pi3 and two URI interfaces.
> From: arm-allstar at hamvoip.org
> CC: mike.lussier at gmail.com
>
>
> Good afternoon Doug,
>
> I understand. That was something i was trying to be more specific. it
> didn't help.
> I have reverted back.
>
>
> Mike
> --
>
>
> _______________________________________________ arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the
> BBB and RPi2 web page - http://hamvoip.org
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>
>
> _______________________________________________ arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the
> BBB and RPi2 web page - http://hamvoip.org
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160730/634dc31e/attachment.html>