[arm-allstar] Trying to connect two nodes

[Bob Poff]

In rpt.conf are they entered into the NODES stanza?

Without using the Allstar directory service they need entries there to find and authenticate each other.

Robert A. Poff
Loganville, Pa




-------- Original Message --------
From: O Z Echo via arm-allstar <arm-allstar at hamvoip.org>
Sent: Sat Jul 09 10:18:13 EDT 2016
To: ARM Allstar <arm-allstar at hamvoip.org>
Cc: O Z Echo <k4ozecho at gmail.com>
Subject: Re: [arm-allstar] Trying to connect two nodes

They both have separate node numbers.  In the setup I chose to not publish
the online status to allstarlink.org.  as far as the port forwarding, in
the setup I remember that being asked and I left it the default 4569.  Is
there something I need to configure in my router?

Vincent Riley
K4OZEcho
(615) 642-4241
On Jul 9, 2016 9:12 AM, "David McGough via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

>
> Hi Vincent,
>
> A couple of things. First, do you have public node numbers for both nodes?
> If not, the easiest solution is to get a second public node number and
> install on your second node.
>
> Second, if your node is on a private IP address, do you have in-bound port
> forwarding setup on the node you're trying to connect to?  If not, the
> default port used is UDP port 4569. Out-bound connection don't need port
> forwarding (hence why you can connect outbound). In-bound does need
> forwarding.
>
> Thats usually about all that's typically needed.
>
>
> 73, David KB4FXC
>
>
>
> On Sat, 9 Jul 2016, O Z Echo via arm-allstar wrote:
>
> > Yes they do.  One is on my home network (Comcast) and the other is
> tethered
> > to my phone's wireless hotspot (Verizon Wireless 4g).
> >
> > Vincent Riley
> > K4OZEcho
> > (615) 642-4241
> > On Jul 9, 2016 8:51 AM, "Bob Pyke via arm-allstar" <
> arm-allstar at hamvoip.org>
> > wrote:
> >
> > > Do these two networks have two separate public IP addresses?
> > >
> > > Thanks,
> > > Bob
> > > k6ecm
> > > 73
> > >
> > > Sent from iPad
> > >
> > >
> > > On Jul 9, 2016, at 6:42 AM, O Z Echo via arm-allstar <
> > > arm-allstar at hamvoip.org> wrote:
> > >
> > > Good morning!  I need some guidance, please.  I have two allstar nodes
> > > setup.  They are both configured like this.  CDM1250 UHF radio, DMK
> URI and
> > > a Raspberry Pi 3.  The Pi is loaded with RPi2-3_V1.02beta_Allstar image
> > > acquired from crompton.com Allstar page.  The Pi was configured using
> the
> > > firsttime.sh.
> > >
> > > Audio is passing in and out.  I am able to connect to various nodes
> around
> > > the world.  However, I'm not able to connect the two nodes together.
> When
> > > I try to connect to the other node it states "connection failed." Both
> > > nodes are on and working and are on separate networks in DHCP.  I can
> see
> > > them both active on allstarlink.org.
> > >
> > > I'm assuming that I have missed something in the setup but have been
> > > scratching my head for a few days now.  We are looking to link two
> repeater
> > > systems together that are too far apart to do with RF.  Any
> suggestions?
> > >
> > > Thank you!
> > >
> > > Vincent Riley
> > > K4OZEcho
> > >
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2 web page - http://hamvoip.org
> > >
> > >
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2 web page - http://hamvoip.org
> > >
> >
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>


------------------------------------------------------------------------

_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160709/143597e8/attachment.html>