[arm-allstar] Courtesy tones
LaRoy McCann
lmccann at dtisp.com
Wed Jan 20 18:00:32 EST 2016
Doug,
I don't have anything specific, I've just been thinking "what if".
I noticed that the autopatch function in rpt.conf shows "noct=1". That
made me wonder if there was any way to change the tones dynamically.
One thing I could think of is to automate certain settings such as
courtesy tones for a net or maybe if a certain node connected.
Again, just just asking if there was anything there by design.
LaRoy McCann, K5TW
On 1/20/2016 4:31 PM, Doug Crompton wrote:
> LaRoy,
>
> On what event do you want to change it? Why do you want to do it? Do
> you just want to change it with a DTMF sequence?
>
> I don't know of any simple way. Perhaps others do? If so I would add
> it to the how-to.
>
> The only way I know of is changing the file and reloading which as you
> said is not very elegant.
>
> *73 Doug
> WA3DSP
> http://www.crompton.com/hamradio*
>
>
> ------------------------------------------------------------------------
> To: arm-allstar at hamvoip.org
> From: lmccann at dtisp.com
> Date: Wed, 20 Jan 2016 15:29:57 -0600
> Subject: Re: [arm-allstar] Courtesy tones
>
> Is there any way to dynamically change the courtesy tones?
> Maybe thru the event management subsystem?
>
> Or is the only way to read the definitions from rpt.conf?
> I know I could always use a script to edit rpt.conf and then reload,
> but was just hoping of some other way to do it.
>
> LaRoy McCann, K5TW
>
>
>
> On 1/20/2016 11:41 AM, LaRoy McCann wrote:
>
> Doug,
>
> */remotetx/* That was what I was looking for.
>
> Thanks
>
> LaRoy McCann, K5TW
>
> On 1/20/2016 11:29 AM, Doug Crompton wrote:
>
> LaRoy,
>
> linkunkeyct when connected and someone on the network
> unkeys. But your local radio unkey is set by the remotetx
> tone group in the telemetry stanza.
>
> So if you change linkunkeyct you would not hear the change
> unless someone else on the connected network unkeys. You could
> test this by connecting two locals nodes together. That is
> why I mentioned it is confusing because you expect it to
> change when you are connected and unkey and it doesn't. Also
> always remember to 'reload rpt' in the client after a change.
>
> *73 Doug
> WA3DSP
> http://www.crompton.com/hamradio*
>
>
> ------------------------------------------------------------------------
> To: arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>
> From: lmccann at dtisp.com <mailto:lmccann at dtisp.com>
> Date: Wed, 20 Jan 2016 10:47:58 -0600
> Subject: [arm-allstar] Courtesy tones
>
> Ok, I've been racking my brain trying to figure this out.
>
> The courtesy tone on a single node when a users unkeys is
> */unlinkedct/*.
>
> The courtesy tone changes when this node connects to another
> node via the internet.
> What courtesy tone variable is used when the local user unkeys
> and the two nodes are linked together?
>
>
> LaRoy McCann, K5TW
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
> This email has been sent from a virus-free computer protected
> by Avast.
> www.avast.com
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
>
>
>
> _______________________________________________ arm-allstar
> mailing list arm-allstar at hamvoip.org
> <mailto:arm-allstar at hamvoip.org>
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> Visit the BBB and RPi2 web page - http://hamvoip.org
>
> --
> This message has been scanned for viruses and
> dangerous content by the *DTISP MailScanner*
> <http://www.dtisp.com/>, and is
> believed to be clean.
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page -http://hamvoip.org
>
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
> This email has been sent from a virus-free computer protected by
> Avast.
> www.avast.com
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
>
>
>
> --
> This message has been scanned for viruses and
> dangerous content by the *DTISP MailScanner*
> <http://www.dtisp.com/>, and is
> believed to be clean.
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page -http://hamvoip.org
>
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
> This email has been sent from a virus-free computer protected by Avast.
> www.avast.com
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
>
>
>
> _______________________________________________ arm-allstar mailing
> list arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit
> the BBB and RPi2 web page - http://hamvoip.org
>
> --
> This message has been scanned for viruses and
> dangerous content by the *DTISP MailScanner* <http://www.dtisp.com/>,
> and is
> believed to be clean.
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160120/3587e0ab/attachment-0001.html>
More information about the arm-allstar
mailing list