[arm-allstar] SimpleUSB & URI

[Doug Crompton]

Mike,

 Not sure what configuration file you have. Here is the info.

carrierfrom=usbinvert      ;usbinvert      ; no,usb,usbinvert
                                     ; no - no carrier detection at all
                                     ; usb - from the COR line on the modified USB sound fob
                                     ; usbinvert - from the inverted COR line on the modified USB sound fob

ctcssfrom=no                  ; no,usb,usbinvert
                                     ; no - CTCSS decoding, system will be carrier squelch
                                     ; usb - CTCSS decoding using input from USB FOB
                                     ; usbinvert - from the inverted CTCSS line on the modified USB sound fob
carrierfrom is pin 8
ctcssfrom is pin 7

They are just bits being read so either could be used but we generally use pin 8.

73 Doug
WA3DSP
http://www.crompton.com/hamradio


From: mzfb at verizon.net
To: arm-allstar at hamvoip.org
Date: Sun, 17 Jan 2016 13:55:31 -0500
Subject: [arm-allstar] SimpleUSB & URI

To allLooking to see if anyone has used PIN 7 CTCSS Detect instead of PIN 8 COR Detect on the DMK URI.   I’m trying to overcome a problem with pulsing from the repeater which don’t seem to be able to correct with RXdelay and other software settings. Within the SimpleUSB Conf file,  I don’t see any setting which would have any effect on Pin 7 of the URI.   Thanks for any assistance in advance. MikeW!ZFB This email has been protected by YAC (Yet Another Cleaner) www.yac.mx
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160118/78ba5163/attachment-0001.html>