[arm-allstar] Easy Digi

[Krys Beal]

I've got the software side of my Pi all setup, and running. The problem I'm
having, is with the configuration of my Easy Digi interface (
http://www.ebay.com/itm/EASY-DIGI-USB-Sound-Card-Interface-NO-MORE-USB-RS232-ADAPTERS-W-CABLES-/221669005522
). I'm not sure how to configure it. It would seem that simple USB applies,
but I can not get it working. This unit was made to interface with a Yaesu
FT-2900R (
https://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=106&encProdID=ACC99ABCBC3E6900FF03ECF2B6382250&DivisionID=65&isArchived=0
). There is an FTDI USB interface that goes to the mic port, and a cord to
the 3.5 mm speaker port on the radio. I then have it fed into the Pi
through an unmodified USB sound fob using both in and out 3.5 mm ports. I
had it working on Echolink (Windows) usin VOx for RX, and RTS for TX.

Thanks in Advance
Krys Beal
K3EAL
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160109/d7ccd00d/attachment.html>