[arm-allstar] the Pi3 is on the way...

Doug Crompton doug at crompton.com
Mon Feb 29 17:43:28 EST 2016


We have several people locally running two nodes on the Pi2 without problems. The instructions on how to do that are in the setup howto on the hamvoip.org web page. 

My point was that in a situation where you want maximum reliability is that a good thing to do. This would be especially true at a remote site. Set them up as separate servers and if one goes down for some reason the rest stay running.
73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Mon, 29 Feb 2016 12:42:01 -0800
To: arm-allstar at hamvoip.org
Subject: Re: [arm-allstar] the Pi3 is on the way...
From: arm-allstar at hamvoip.org
CC: kk6ecm at gmail.com

I've experienced issues with ACID on the higher priced boards when I install two nodes, with both USB devices on one bus. Placing them on separate buses works best. The RPi 2 shows logical positions of 4 devices in one bus. If the Pi 3 also utilizes a single bus for all devices I'd question the wisdom of trying to put two radio nodes on one RPi3.
Any thoughts on this?
Thanks,Bobkk6ecm73
Sent from iPad

On Feb 29, 2016, at 9:27 AM, Doug Crompton via arm-allstar <arm-allstar at hamvoip.org> wrote:




Whether the Pi3 would handle more than two USB connections remains to be seen. There is much more to it than processor speed. That being said why would you want to do that? I can understand the old way of doing things where you had one higher priced PC with hard drives, size, heat, power consumption and you didn't want to create another just to run more nodes but with the cheap small board computers that is not an issue. Most that would want to run more than two nodes are using Allstar to control repeaters and having it all run from one board is not a good way to do it from a redundancy standpoint. If one system goes down you have lost all repeaters or nodes.

I would even go as far as saying it would be much better to have one server per repeater or node. The only hardware you are adding is another Pi and power supply, not a big expense. The boards and nodes can be Ethernet connected as easily as if they were on the same server. That is the beauty of Allstar, you can have as many "ports" as you want.

I think we have to look at this from the perspective of current cost, power consumption, etc and not from the old large computer paradigm.  
73 Doug
WA3DSP
http://www.crompton.com/hamradio


> Date: Mon, 29 Feb 2016 09:16:36 -0600
> To: arm-allstar at hamvoip.org
> Subject: Re: [arm-allstar] the Pi3 is on the way...
> From: arm-allstar at hamvoip.org
> CC: ka5iid at swbell.net
> 
> Doug, looks like it will be time to see if this new version can handle more than 2 radios since it has more cores and processor speed. 
> 
> Stan
> 
> Sent from my iPhone
> 
> > On Feb 29, 2016, at 7:53 AM, David McGough via arm-allstar <arm-allstar at hamvoip.org> wrote:
> > 
> > 
> > 
> > Well, they're now officially released for sale!
> > 
> > https://www.raspberrypi.org/blog/raspberry-pi-3-on-sale/
> > 
> > 
> > 
> > 73, David KB4FXC
> > 
> > 
> > 
> >> On Sat, 27 Feb 2016, Pierre Martel via arm-allstar wrote:
> >> 
> >> http://hothardware.com/news/raspberry-pi-3-breaks-cover-in-fcc-filing-now-with-on-board-wifi-and-bluetooth
> >> 
> >> wonder what will be the cpu and speed..
> > 
> > _______________________________________________
> > 
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > 
> > Visit the BBB and RPi2 web page - http://hamvoip.org
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2 web page - http://hamvoip.org
> 
 		 	   		  
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160229/fe051ab8/attachment-0001.html>


More information about the arm-allstar mailing list