[arm-allstar] arm-allstar Digest, Vol 31, Issue 18
Kevin Halton
ka1mxl at cox.net
Tue Dec 13 21:24:32 EST 2016
Mark,
Thanks for the information, just want to clarify your last bit of info. I
would enter this in all 3 nodes? So each node will have 2 entries with the
other node # listed?
*[radio-control]*
*exten=29626,1,Answer*
*exten=29626,n,Playback,rpt/node*
*exten=29626,n,Rpt,29626|Pv*
*exten=29627,1,Answer*
*exten=29627,n,Playback,rpt/node*
*exten=29627,n,Rpt,29627|Pv*
-----Original Message-----
From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
arm-allstar-request at hamvoip.org
Sent: Tuesday, December 13, 2016 9:15 PM
To: arm-allstar at hamvoip.org
Subject: arm-allstar Digest, Vol 31, Issue 18
Send arm-allstar mailing list submissions to
arm-allstar at hamvoip.org
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
or, via email, send a message with subject or body 'help' to
arm-allstar-request at hamvoip.org
You can reach the person managing the list at
arm-allstar-owner at hamvoip.org
When replying, please edit your Subject line so it is more specific than
"Re: Contents of arm-allstar digest..."
Today's Topics:
1. Re: Wifi problem (David McGough)
2. Re: Wifi problem (Doug Crompton)
3. Zoiper setup (Kevin Halton)
4. Re: Zoiper setup (Michael Hebert)
5. Re: No Node Connect (Chris Viningre)
6. Re: No Node Connect (Chris Viningre)
7. Re: No Node Connect (Doug Crompton)
8. Re: Zoiper setup (Mark Johnston)
----------------------------------------------------------------------
Message: 1
Date: Tue, 13 Dec 2016 18:46:36 -0500 (EST)
From: David McGough <kb4fxc at inttek.net>
To: "\"Roselito de los Reyes via arm-allstar\""
<arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] Wifi problem
Message-ID:
<Pine.LNX.4.44.1612131844380.28511-100000 at goliath.inttek.net>
Content-Type: TEXT/PLAIN; charset=US-ASCII
Hi Lito,
I agree the WiFi tools in V1.02 are a little weak on functionality.
This is an area we're working to improve with V1.5.
73, David KB4FXC
On Tue, 13 Dec 2016, "Roselito de los Reyes via arm-allstar" wrote:
> Hi David,
>
>
> One thing I noticed that if I moved to two or three different wifi and/or
wired ethernet areas, the resolv.conf does not get updated everytime there
is a change.
>
>
> 73,
>
>
> Lito
>
>
> ________________________________
> From: arm-allstar <arm-allstar-bounces at hamvoip.org> on behalf of
> "David McGough via arm-allstar" <arm-allstar at hamvoip.org>
> Sent: Tuesday, December 13, 2016 3:07 PM
> To: Chris Viningre via arm-allstar
> Cc: David McGough
> Subject: Re: [arm-allstar] Wifi problem
>
>
> Hi Chris,
>
> wireless_tools-30.pre9-1-armv7h.pkg.tar.xz is available here, for one
> source:
>
> https://hamvoip.org/arch/armv7h/core/wireless_tools-30.pre9-1-armv7h.p
> kg.tar.xz
>
> 73, David KB4FXC
>
>
>
> On Tue, 13 Dec 2016, "Chris Viningre via arm-allstar" wrote:
>
> > I'm trying to setup wifi on a Pi3. After downloading the file I run
> > this scrip and get an error. Any ideals?
> >
> > [root at ws5b ~]# pacman -U --force
> > hamvoip-wireless-config-0.1-7.pkg.tar.xz
> > loading packages...
> > resolving dependencies...
> > looking for conflicting packages...
> >
> > Packages (2) wireless_tools-30.pre9-1 hamvoip-wireless-config-0.1-7
> >
> > Total Download Size: 0.12 MiB
> > Total Installed Size: 0.36 MiB
> >
> > :: Proceed with installation? [Y/n] y
> > :: Retrieving packages ...
> > error: failed retrieving file
> > 'wireless_tools-30.pre9-1-armv7h.pkg.tar.xz' from
> > mirror.archlinuxarm.org : Could not resolve host:
> > mi.us.mirror.archlinuxarm.org
> > warning: failed to retrieve some files
> > error: failed to commit transaction (download library error) Errors
> > occurred, no packages were upgraded.
> >
> >
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> arm-allstar Info
> Page<http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar>
> lists.hamvoip.org
> This list is for support, announcements, and general information about ARM
Allstar projects at hamvoip.org including but not limited to the BeagleBone
Black and ...
>
>
>
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org Asterisk
> Allstar on the BeagleBone Black and the Raspberry
> ...<http://hamvoip.org/> hamvoip.org Latest News - November 24, 2016.
> Well it has been a long wait but I think the wait will have been worth it.
Our new Raspberry Pi 2/3 update version 1.5 will be out ...
>
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
------------------------------
Message: 2
Date: Tue, 13 Dec 2016 18:48:47 -0500
From: Doug Crompton <wa3dsp at gmail.com>
To: ARM Allstar <arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] Wifi problem
Message-ID:
<CAMp6vstAZPw9=73T9y42LpCi5Yf+VMJs7xTacESOKjgoJx+Lxw at mail.gmail.com>
Content-Type: text/plain; charset=UTF-8
Lito,
Name resolving in the hamvoip.org code is running internally - thus
127.0.0.1 in resolv.conf - to the root name servers. This "should" work in
all cases and would not normally need to be changed.
*73 Doug*
*WA3DSP*
*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
On Tue, Dec 13, 2016 at 6:29 PM, "Roselito de los Reyes via arm-allstar" <
arm-allstar at hamvoip.org> wrote:
> Hi David,
>
>
> One thing I noticed that if I moved to two or three different wifi
> and/or wired ethernet areas, the resolv.conf does not get updated
> everytime there is a change.
>
>
> 73,
>
>
> Lito
>
>
> ________________________________
> From: arm-allstar <arm-allstar-bounces at hamvoip.org> on behalf of
> "David McGough via arm-allstar" <arm-allstar at hamvoip.org>
> Sent: Tuesday, December 13, 2016 3:07 PM
> To: Chris Viningre via arm-allstar
> Cc: David McGough
> Subject: Re: [arm-allstar] Wifi problem
>
>
> Hi Chris,
>
> wireless_tools-30.pre9-1-armv7h.pkg.tar.xz is available here, for one
> source:
>
> https://hamvoip.org/arch/armv7h/core/wireless_tools-30.
> pre9-1-armv7h.pkg.tar.xz
>
> 73, David KB4FXC
>
>
>
> On Tue, 13 Dec 2016, "Chris Viningre via arm-allstar" wrote:
>
> > I'm trying to setup wifi on a Pi3. After downloading the file I run
> > this scrip and get an error. Any ideals?
> >
> > [root at ws5b ~]# pacman -U --force hamvoip-wireless-config-0.1-7.
> pkg.tar.xz
> > loading packages...
> > resolving dependencies...
> > looking for conflicting packages...
> >
> > Packages (2) wireless_tools-30.pre9-1 hamvoip-wireless-config-0.1-7
> >
> > Total Download Size: 0.12 MiB
> > Total Installed Size: 0.36 MiB
> >
> > :: Proceed with installation? [Y/n] y
> > :: Retrieving packages ...
> > error: failed retrieving file
> > 'wireless_tools-30.pre9-1-armv7h.pkg.tar.xz' from
> > mirror.archlinuxarm.org : Could not resolve host:
> > mi.us.mirror.archlinuxarm.org
> > warning: failed to retrieve some files
> > error: failed to commit transaction (download library error) Errors
> > occurred, no packages were upgraded.
> >
> >
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> arm-allstar Info Page<http://lists.hamvoip.org/
> cgi-bin/mailman/listinfo/arm-allstar>
> lists.hamvoip.org
> This list is for support, announcements, and general information about
> ARM Allstar projects at hamvoip.org including but not limited to the
> BeagleBone Black and ...
>
>
>
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org Asterisk
> Allstar on the BeagleBone Black and the Raspberry ...<
> http://hamvoip.org/> hamvoip.org Latest News - November 24, 2016. Well
> it has been a long wait but I think the wait will have been worth it.
> Our new Raspberry Pi 2/3 update version
> 1.5 will be out ...
>
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>
------------------------------
Message: 3
Date: Tue, 13 Dec 2016 19:27:04 -0500
From: "Kevin Halton" <khalton at cox.net>
To: <arm-allstar at hamvoip.org>
Subject: [arm-allstar] Zoiper setup
Message-ID: <020201d255a0$cc23c3f0$646b4bd0$@cox.net>
Content-Type: text/plain; charset="us-ascii"
Hello everyone,
I am attempting to setup up Zoiper on three nodes I use here. I have my
first node working with zero issues. I can connect via wifi when home and
thru the cell network when on the road out of radio range. My 2 other nodes
register with Zoiper but I get errors when I try to dial them up "ERROR - no
such context/extension(3)" . Not sure of what I am missing here? Any help
would be most appreciated.
Thanks
------------------------------
Message: 4
Date: Tue, 13 Dec 2016 19:06:09 -0600
From: Michael Hebert <mhebert1975 at gmail.com>
To: ARM Allstar <arm-allstar at hamvoip.org>
Cc: Kevin Halton <khalton at cox.net>
Subject: Re: [arm-allstar] Zoiper setup
Message-ID:
<CANQAhPHkSf_d+f3h1Sd8huCTJ=7KFOXueZJqzHB_akM187dyBQ at mail.gmail.com>
Content-Type: text/plain; charset=UTF-8
Make sure you context in iax.conf matches to extensions.conf
; iphone example
[myphone]
exten=44216,1,rpt(44216|P)
In your /etc/asterisk/iax.conf file
; Iphone IAX connection
[myiphone]
username=myiphone
type=friend
context=myphone
host=dynamic
auth=md5
; add a passsword of your selection for secret secret= disallow=all
allow=ulaw
allow=g726aal2
allow=gsm
codecpriority=host
transfer=no
; add your call or your selection for callerid callerid=""
On Tue, Dec 13, 2016 at 6:27 PM, "Kevin Halton via arm-allstar" <
arm-allstar at hamvoip.org> wrote:
> Hello everyone,
>
>
>
> I am attempting to setup up Zoiper on three nodes I use here. I have
> my first node working with zero issues. I can connect via wifi when
> home and thru the cell network when on the road out of radio range. My
> 2 other nodes register with Zoiper but I get errors when I try to dial
> them up "ERROR - no such context/extension(3)" . Not sure of what I am
> missing here? Any help would be most appreciated.
>
>
>
> Thanks
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
------------------------------
Message: 5
Date: Tue, 13 Dec 2016 18:16:07 -0700
From: Chris Viningre <chrisviningre at gmail.com>
To: ARM Allstar <arm-allstar at hamvoip.org>
Cc: Doug Crompton <wa3dsp at gmail.com>
Subject: Re: [arm-allstar] No Node Connect
Message-ID:
<CA+QqUhk50Vo2osy4hN1DAqRQY+rR4=+UDbA3W-6vVsqDu0xgUQ at mail.gmail.com>
Content-Type: text/plain; charset=UTF-8
I have now tried 3 different software packages now running on a different
node and have tried 2 different providers. I still cant connect to another
node.
Chris Viningre
70 W. Roadrunner
Salt Flat, Texas 79847
C:(915) 504-1510
chrisviningre at gmail.com
Amateur Radio Operator: WS5B
https://www.qrz.com/db/ws5b
http://www.reverbnation.com/chrisviningre
On Tue, Dec 13, 2016 at 10:03 AM, "Doug Crompton via arm-allstar"
<arm-allstar at hamvoip.org> wrote:
> Chris,
>
> Another thing occurred to me, is your node registering? If not you
> would not get the node list.
>
> do 'iax2 show registry' in the client. If it is not registering
> then check your node number and node PW in iax.conf against your info
> at allstarlink.org
>
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
> On Tue, Dec 13, 2016 at 4:21 AM, "Chris Viningre via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
>> I'm running a Pi-3 on a repeater. The problem is that I'm unable to
>> connect to any other nodes. When I used the DTMF from any of my
>> radios or *3<node number> from IAXRPT, I get no reponce. I do get a
>> reponce when I send *70, *80, *81. I aslo see all DTMFs when watching
>> CLI. I'm lost and I hope someone can help. Thanks
>>
>> Chris Viningre
>> 70 W. Roadrunner
>> Salt Flat, Texas 79847
>> C:(915) 504-1510
>> chrisviningre at gmail.com
>> Amateur Radio Operator: WS5B
>> https://www.qrz.com/db/ws5b
>> http://www.reverbnation.com/chrisviningre
>> _______________________________________________
>>
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>
>>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
------------------------------
Message: 6
Date: Tue, 13 Dec 2016 19:01:05 -0700
From: Chris Viningre <chrisviningre at gmail.com>
To: doug at crompton.com
Cc: ARM Allstar <arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] No Node Connect
Message-ID:
<CA+QqUhkZfHUgXm7wCrQ8Qt9kGb1injeZHQ2VEkEAN3aYiqoifA at mail.gmail.com>
Content-Type: text/plain; charset=UTF-8
That would be great. Let me know when. I have team viewer.
Chris Viningre
70 W. Roadrunner
Salt Flat, Texas 79847
C:(915) 504-1510
chrisviningre at gmail.com
Amateur Radio Operator: WS5B
https://www.qrz.com/db/ws5b
http://www.reverbnation.com/chrisviningre
On Tue, Dec 13, 2016 at 6:51 PM, Doug Crompton <wa3dsp at gmail.com> wrote:
> If you are using the hamvoip code I would be glad to either log in
> remotely and/or talk on the phone and see what I can do.
>
>
> 73 Doug
> WA3DSP
> http://www.crompton.com/hamradio
>
> On Tue, Dec 13, 2016 at 8:16 PM, Chris Viningre
> <chrisviningre at gmail.com>
> wrote:
>>
>> I have now tried 3 different software packages now running on a
>> different node and have tried 2 different providers. I still cant
>> connect to another node.
>> Chris Viningre
>> 70 W. Roadrunner
>> Salt Flat, Texas 79847
>> C:(915) 504-1510
>> chrisviningre at gmail.com
>> Amateur Radio Operator: WS5B
>> https://www.qrz.com/db/ws5b
>> http://www.reverbnation.com/chrisviningre
>>
>>
>> On Tue, Dec 13, 2016 at 10:03 AM, "Doug Crompton via arm-allstar"
>> <arm-allstar at hamvoip.org> wrote:
>> > Chris,
>> >
>> > Another thing occurred to me, is your node registering? If not you
>> > would not get the node list.
>> >
>> > do 'iax2 show registry' in the client. If it is not registering
>> > then check your node number and node PW in iax.conf against your
>> > info at allstarlink.org
>> >
>> >
>> >
>> > *73 Doug*
>> >
>> > *WA3DSP*
>> >
>> > *http://www.crompton.com/hamradio
>> > <http://www.crompton.com/hamradio>*
>> >
>> > On Tue, Dec 13, 2016 at 4:21 AM, "Chris Viningre via arm-allstar" <
>> > arm-allstar at hamvoip.org> wrote:
>> >
>> >> I'm running a Pi-3 on a repeater. The problem is that I'm unable
>> >> to connect to any other nodes. When I used the DTMF from any of my
>> >> radios or *3<node number> from IAXRPT, I get no reponce. I do get
>> >> a reponce when I send *70, *80, *81. I aslo see all DTMFs when
>> >> watching CLI. I'm lost and I hope someone can help. Thanks
>> >>
>> >> Chris Viningre
>> >> 70 W. Roadrunner
>> >> Salt Flat, Texas 79847
>> >> C:(915) 504-1510
>> >> chrisviningre at gmail.com
>> >> Amateur Radio Operator: WS5B
>> >> https://www.qrz.com/db/ws5b
>> >> http://www.reverbnation.com/chrisviningre
>> >> _______________________________________________
>> >>
>> >> arm-allstar mailing list
>> >> arm-allstar at hamvoip.org
>> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> >>
>> >> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>> >>
>> >>
>> > _______________________________________________
>> >
>> > arm-allstar mailing list
>> > arm-allstar at hamvoip.org
>> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> >
>> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>
------------------------------
Message: 7
Date: Tue, 13 Dec 2016 20:51:49 -0500
From: Doug Crompton <wa3dsp at gmail.com>
To: chrisviningre at gmail.com
Cc: ARM Allstar <arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] No Node Connect
Message-ID:
<CAMp6vsv6gsfd6stCH4G-JUYugQ4VAZXEQHofDQ1dRj0sBukd5A at mail.gmail.com>
Content-Type: text/plain; charset=UTF-8
If you are using the hamvoip code I would be glad to either log in remotely
and/or talk on the phone and see what I can do.
*73 Doug*
*WA3DSP*
*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
On Tue, Dec 13, 2016 at 8:16 PM, Chris Viningre <chrisviningre at gmail.com>
wrote:
> I have now tried 3 different software packages now running on a
> different node and have tried 2 different providers. I still cant
> connect to another node.
> Chris Viningre
> 70 W. Roadrunner
> Salt Flat, Texas 79847
> C:(915) 504-1510
> chrisviningre at gmail.com
> Amateur Radio Operator: WS5B
> https://www.qrz.com/db/ws5b
> http://www.reverbnation.com/chrisviningre
>
>
> On Tue, Dec 13, 2016 at 10:03 AM, "Doug Crompton via arm-allstar"
> <arm-allstar at hamvoip.org> wrote:
> > Chris,
> >
> > Another thing occurred to me, is your node registering? If not you
> > would not get the node list.
> >
> > do 'iax2 show registry' in the client. If it is not registering
> > then check your node number and node PW in iax.conf against your
> > info at allstarlink.org
> >
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio
> > <http://www.crompton.com/hamradio>*
> >
> > On Tue, Dec 13, 2016 at 4:21 AM, "Chris Viningre via arm-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> >> I'm running a Pi-3 on a repeater. The problem is that I'm unable to
> >> connect to any other nodes. When I used the DTMF from any of my
> >> radios or *3<node number> from IAXRPT, I get no reponce. I do get a
> >> reponce when I send *70, *80, *81. I aslo see all DTMFs when
> >> watching CLI. I'm lost and I hope someone can help. Thanks
> >>
> >> Chris Viningre
> >> 70 W. Roadrunner
> >> Salt Flat, Texas 79847
> >> C:(915) 504-1510
> >> chrisviningre at gmail.com
> >> Amateur Radio Operator: WS5B
> >> https://www.qrz.com/db/ws5b
> >> http://www.reverbnation.com/chrisviningre
> >> _______________________________________________
> >>
> >> arm-allstar mailing list
> >> arm-allstar at hamvoip.org
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >>
> >>
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
------------------------------
Message: 8
Date: Tue, 13 Dec 2016 18:14:45 -0800
From: Mark Johnston <markjohnston73 at gmail.com>
To: ARM Allstar <arm-allstar at hamvoip.org>
Cc: Kevin Halton <khalton at cox.net>
Subject: Re: [arm-allstar] Zoiper setup
Message-ID:
<CAARNdJFbjEK9v4e1n-zYW=1WaKgMkBRk2_GxY59wXaHi+jYGEg at mail.gmail.com>
Content-Type: text/plain; charset=UTF-8
Kevin,
Also want to make sure you have an entry in extensions.conf for each node
ex:
*[radio-control]*
*exten=29626,1,Answer*
*exten=29626,n,Playback,rpt/node*
*exten=29626,n,Rpt,29626|Pv*
*exten=29627,1,Answer*
*exten=29627,n,Playback,rpt/node*
*exten=29627,n,Rpt,29627|Pv*
Substituting with your node #'s of course...
and after updating the file run asterisk -rx "dialplan reload"
"Got Root?"
How many software engineers does it take to change a light bulb?
*None. It's a hardware problem.*
Unix is user friendly. It's just very particular about who it's friends are.
WINDOWS: Will Install Needless Data On Whole System
MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools
Teenagers.
A ntennas
P oorly
P laced
L acks
E ngineering
The best way to accelerate a computer running Windows is at 9.81 m/s?.
*"I get paid to support Windows, I use Linux to get work done."*
On Tue, Dec 13, 2016 at 4:27 PM, "Kevin Halton via arm-allstar" <
arm-allstar at hamvoip.org> wrote:
> Hello everyone,
>
>
>
> I am attempting to setup up Zoiper on three nodes I use here. I have
> my first node working with zero issues. I can connect via wifi when
> home and thru the cell network when on the road out of radio range. My
> 2 other nodes register with Zoiper but I get errors when I try to dial
> them up "ERROR - no such context/extension(3)" . Not sure of what I am
> missing here? Any help would be most appreciated.
>
>
>
> Thanks
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
------------------------------
Subject: Digest Footer
_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
------------------------------
End of arm-allstar Digest, Vol 31, Issue 18
*******************************************
More information about the arm-allstar
mailing list