[arm-allstar] Callsign connect/disconnect messages

[Doug Crompton]

Simon,

  Sorry about that. I forgot it was already in the downloads -

https://hamvoip.org/downloads/write_node_callsigns.tar.gz

As for saying things, if it is not in the Alison library then you will have
to create it with TTS.  There are many places where you can do one time tts
translations on the web. I did  "you are connected to the win system"  here
-

https://text-to-speech-demo.mybluemix.net/

and it sounded very good. If you don't have access here is the file. You
will need to convert it to use with Allstar.

https://hamvoip.org/downloads/win_connect.ogg



*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Sun, Dec 11, 2016 at 11:09 PM, "Simon Keys via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Thanks Doug - for some reason the attachment didn't come through?
> Anyway I noticed you had written something only after I spent half of
> Sunday writing the thing!!  Mine uses awk and I suspect it's a little
> slower than yours as it took a while to finish.
>
> I'd like to create some custom announcements for the likes of the WIN
> system.  Can I get Allison to say "win" somehow?
>
> Please can you resend the attachment.
>
> Also - is there a files section?  Somewhere that we can either download
> scripts or upload our own to share with others.
>
> Regards Simon ZL1OE
>
>
>
>
> On Mon, Dec 12, 2016 at 4:27 PM, "Doug Crompton via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Simon,
> >
> >  I am attaching the write nodename script I wrote over a year ago. I have
> > not used it in awhile but I believe others are using it successfully.
> > Perhaps this could help you.
> >
> > I would think you should not need to refresh this very often. If you
> hear a
> > node that has not been defined then you can just write that node with
> this
> > script.
> >
> > Run the script without any options for help.
> >
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> > On Sun, Dec 11, 2016 at 9:11 PM, "Simon Keys via arm-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > Hi all
> > >
> > > I have written a script which automatically builds the callsign ulaw
> > files
> > > in /var/lib/asterisk/sounds/rpt/nodenames.  It works well for a first
> > cut
> > > however I was wondering, should I create the files on TEMPFS with a
> > symlink
> > > to sounds/rpt/nodenames?  That way I would avoid large writes to the SD
> > > card.  It seems to me that there are very few SD card writes in this
> > > Allstar build and I want to stay within this guideline.
> > >
> > > Because there are >6000 callsign files the build process takes a while
> > and
> > > I was guessing it would normally run once per day after a refresh of
> > > astdb.txt.
> > >
> > > Regards Simon ZL1OE
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> > >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>