[arm-allstar] Callsign connect/disconnect messages

[Doug Crompton]

Simon,

 I am attaching the write nodename script I wrote over a year ago. I have
not used it in awhile but I believe others are using it successfully.
Perhaps this could help you.

I would think you should not need to refresh this very often. If you hear a
node that has not been defined then you can just write that node with this
script.

Run the script without any options for help.



*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Sun, Dec 11, 2016 at 9:11 PM, "Simon Keys via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hi all
>
> I have written a script which automatically builds the callsign ulaw files
> in /var/lib/asterisk/sounds/rpt/nodenames.  It works well for a first cut
> however I was wondering, should I create the files on TEMPFS with a symlink
> to sounds/rpt/nodenames?  That way I would avoid large writes to the SD
> card.  It seems to me that there are very few SD card writes in this
> Allstar build and I want to stay within this guideline.
>
> Because there are >6000 callsign files the build process takes a while and
> I was guessing it would normally run once per day after a refresh of
> astdb.txt.
>
> Regards Simon ZL1OE
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>