[arm-allstar] Arduino Nano info

[Doug Crompton]

Larry,

 I did not mention the connector on my howto but I just added a link for
the cable with a photo.

For those who get these confused, I sometimes do, the micro USB is the
connector the Pi uses for power. The Nano has a mini USB. They are not that
much different in size but the connector is shaped differently.

And to make it all more confusing we now have USB-C which might replace it
all in the future.



*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Sat, Dec 3, 2016 at 2:20 PM, "Larry via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> As all this great development goes on ...
>
> Different authors of the great information pages are hurrying to appease
> those of us who impatiently wait.
> I'm sure during some late night typing sessions it would be easy to
> confuse or forget which goes where with all the different USB cables
> required.
> We need readers need to keep that in mind .... People need to verify which
> type of USB connector is used for their own hardware.
>
> Before ordering any Nano .... Arduino Nano connections indicate a USB MinI
> B Jack mounted on the board... not a USB Micro.
>
> Larry - N7FM
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>