[arm-allstar] Same server nodes can't connect
Doug Crompton
doug at crompton.com
Wed Aug 31 08:06:45 EST 2016
Wade,
- 4569 is the default port so you don't have to enter that port unless you want to for consistency.
- make sure your port definition in iax.conf and that servers port at allstarlink.org match for each server. IP address in iax.conf should be 0.0.0.0 (default) and no IP address at allstarlink.org - should be default DHCP
- nodes entry at each server for itself - 127.0.0.1 and the other servers IP and its port
What kind of message(s) are you getting in the client at each end when you attempt the failed connect? Do you have codecs that match on each server?
asterisk -rvvv and look for messages at connect attempt.
73 Doug
WA3DSP
http://www.crompton.com/hamradio
To: arm-allstar at hamvoip.org
Date: Wed, 31 Aug 2016 02:32:36 -0500
Subject: Re: [arm-allstar] Same server nodes can't connect
From: arm-allstar at hamvoip.org
CC: wadeo at charter.net
Yep, I have followed that sheet. Here is what the Pi has in the
rpt.conf file towards the bottom.. (xxxx = port assigned)
40509 = radio at 127.0.0.1/40509,NONE
28757 = radio at 127.0.0.1/28757,NONE
40508 = radio at 192.168.1.105:XXXX/40508,NONE
Of course the Acid server is just the opposite with the
appropriate port entered. I can't figure it out.. Did something
corrupt possibly?? Am I needing to do a fresh install from the
card? Is there any other file I should be looking at for this?
Wade
On 08/30/2016 10:12 PM, Doug Crompton
via arm-allstar wrote:
There has been a howto about this on the
hamvoip.org web site for a long time.....
https://www.hamvoip.org/multi-server%20howto.pdf
73 Doug
WA3DSP
http://www.crompton.com/hamradio
> To: arm-allstar at hamvoip.org
> Date: Tue, 30 Aug 2016 20:22:46 -0500
> Subject: [arm-allstar] Same server nodes can't connect
> From: arm-allstar at hamvoip.org
> CC: wadeo at charter.net
>
> Good evening all,
>
>
> Today I moved one of my nodes from an old ACID server in
the other room
> to the Pi I have in my shack. The Pi now has 2 nodes on
it and the ACID
> machine only has 1. After following the documentation
online for setting
> up a second node on the Pi I am having an issue. The 2
nodes on the Pi
> can not connect to each other. They can both connect to
the ACID server
> / node and to any other node anywhere in the world, just
not to each
> other. Apparently there is something I missed and for the
life of me
> can't think of anything else to try here.
>
> Yes, I did make the appropriate changes on the AllStar
website and I do
> have the severs on different ports with correct
forwarding and all that.
> Another node here in town can connect to any node of mine
as one would
> expect. This seems to be something small so I have
probably overlooked
> it somewhere.
>
>
> Thanks in advance!
>
> Wade
>
> KC0MLT
>
>
> (28757, 40509 RPi nodes)
>
> (40508 ACID node)
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
>
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>
_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB and RPi2 web page - http://hamvoip.org
_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB and RPi2 web page - http://hamvoip.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160831/01336b32/attachment.html>
More information about the arm-allstar
mailing list