[arm-allstar] Digits 2, 3 Not Decoding

[John]

Thanks, Mark. Simple thought, but one that hadn't occurred to me. After
doing so, we definitely have some problems to sort out. Change the digits
and the levels change - considerably.

J.

On Fri, Aug 5, 2016 at 6:28 PM, Mark Johnston via arm-allstar <
arm-allstar at hamvoip.org> wrote:

> Try simple USB tune check the level while holding the 3...
>
> On Aug 5, 2016 16:09, "John via arm-allstar" <arm-allstar at hamvoip.org>
> wrote:
>
>> I'm helping a friend get a new node on the air. We're using a Raspberry
>> Pi3 with the latest image and simpleusb. Digits 2 & 3 do not decode, but
>> all others do. The same problem persists with two different HTs into the
>> node. Audio levels sound good in and out, but we don't have access to a
>> monitor / signal generator at this time. Suggestions?
>>
>> John
>>
>> _______________________________________________
>>
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2 web page - http://hamvoip.org
>>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160805/b75e18d2/attachment.html>