[arm-allstar] Digits 2, 3 Not Decoding

Mark Johnston markjohnston73 at gmail.com
Fri Aug 5 18:28:12 EST 2016


Try simple USB tune check the level while holding the 3...

On Aug 5, 2016 16:09, "John via arm-allstar" <arm-allstar at hamvoip.org>
wrote:

> I'm helping a friend get a new node on the air. We're using a Raspberry
> Pi3 with the latest image and simpleusb. Digits 2 & 3 do not decode, but
> all others do. The same problem persists with two different HTs into the
> node. Audio levels sound good in and out, but we don't have access to a
> monitor / signal generator at this time. Suggestions?
>
> John
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160805/0b5f551b/attachment.html>


More information about the arm-allstar mailing list