[arm-allstar] Hello, and question

[Doug Crompton]

If you find a good link let me know. The upcoming update should eliminate the need to modify the sound FOBS entirely giving PTT and COS from the USB to serial adapter.

The response cutoff issue on the FOBS is probably a non-issue for most. Check it with a scope if you think it is a problem and put a non active RC filter whihc should be fine for 48Khz especially with the rolloff of the radio, etc. 
73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Thu, 7 Apr 2016 16:34:14 -0500
To: arm-allstar at hamvoip.org
Subject: Re: [arm-allstar] Hello, and question
From: arm-allstar at hamvoip.org
CC: kd0qcn at aecimo.org

Along these same lines, I have been looking for the USB fobs that don't have the dreaded blob. I followed the most recent EBay link and those were sold out. Does anyone have a current known good source for the fobs? I have several that I have purchased with the blob that can't be used.  Any help in sourcing these would be greatly appreciated since I know these are getting harder to find.
Thanks,Jeff Carlyle KD0QCN 


On Apr 7, 2016, at 11:58 AM, Doug Crompton via arm-allstar <arm-allstar at hamvoip.org> wrote:




Hi Greg,

Unfortunately Google voice which we used in the current weather scripts stopped being available. That meant the TTS element of the weather scripts had to be modified. The new weather code is done and tested and waiting for the 2.0 release. So hang in there, it is coming.

On the difference between a DMK URI and modified FOB I have never noticed a difference and I am fairly critical of audio. There is slightly more filtering in the DMK product but they both use the same chip. The DMK URI schematic is readily available at their web site and you can compare the differences. The simple FOB has a wider frequency response as one of its uses is for headphone listening of stereo music. This is usually not an issue though as most radios roll off above the communication quality upper limit.  
73 Doug
WA3DSP
http://www.crompton.com/hamradio


> To: arm-allstar at hamvoip.org
> Date: Thu, 7 Apr 2016 12:15:31 -0400
> Subject: [arm-allstar] Hello, and question
> From: arm-allstar at hamvoip.org
> CC: kb1ncj at gmail.com
> 
> I see some info about new weather scripts on a 1.3 version but I find no 
> download for that version's image. Is there a way to get the scripts 
> themselves to compile on an older version? I don't mind updating my 
> version either. I am on a BBB. I also wondered if there was any quality 
> difference in a usb fob modified and a dmk uri.
> Thanks,
> Greg
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2 web page - http://hamvoip.org
> 
 		 	   		  
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160407/ac7015fe/attachment-0001.html>