[arm-allstar] Anyone running RTCM?

[John C. Westmoreland, P.E.]

Hello Steve,

If you don't mind me asking; how much does the Ubiquiti stuff run to set up
what you have:
https://www.ubnt.com/products/ ?

73's,
John AJ6BC


On Tue, Sep 8, 2015 at 6:39 PM, Steve Wright <stevewrightnz at gmail.com>
wrote:

> Hi folks,
>
> A group of us locally are looking at a high-end 6m VOTER Simulcast
> repeater.  We'd sure would be interested in comments before we started off!
>
> We want to have a TX-only site with outboard remote voting receivers -
> for the purpose of dodging all the duplexing complexity, and also to be
> able to run some serious horsepower on TX, full legal-limit into a large
> antenna array is the plan.
>
> We have plenty of sites - some of them mains-powered, and plenty of
> line-of-sight Ubiquiti-wireless-link lovin' to the others.
>
> We aim to start small and kick off a bit of a craze and see what other
> (regional) locals will join us and add their own high-power TX and
> remote RX as well.  We think there is the potential to build a very
> interesting piece of distributed machinery that will be sought after
> globally.
>
> Any suggestions?
>
>
> Steve ZL1BHD
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150908/2be54028/attachment.html>