[arm-allstar] Kenwood TM-G707 for remote base BBB node

[Jamey Wright]

You need the interface shown in the attachment.  The page was taken from the Arcom RC-210 controller manual.  Instead of Pin 15 on the DB-25 you feed it serial data from a serial port.  I run a TM-271 as a remote base and have not had any issues (once I figured everything out).

 

Jamey

WR4JW  

 

From: arm-allstar-bounces at hamvoip.org [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of Levi C. Maaia
Sent: Wednesday, October 14, 2015 12:38 PM
To: arm-allstar at hamvoip.org
Subject: Re: [arm-allstar] Kenwood TM-G707 for remote base BBB node

 

David,

 

Thanks for the tips on the 707 and your experience with it.  Now I will know what to expect if I decide to go down this path.

 

LCM

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20151014/cbe25ab4/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: TMG707 interface.pdf
Type: application/pdf
Size: 224718 bytes
Desc: not available
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20151014/cbe25ab4/attachment-0001.pdf>