[arm-allstar] Kenwood TM-G707 for remote base BBB node

[Pierre Martel]

After reading the user manual of the radio I dont see a way to control it..
the data port is a tnc port wich give you acces to the discriminator and
modulator of the radio as well as cor and ptt. there is no way to program
the radio to change frequency.



2015-10-13 16:46 GMT-04:00 Levi C. Maaia <lee317 at maaia.com>:

> First time poster here …
>
> I would like to use my Kenwood TM-G707A as the radio for a frequency agile
> remote base BBB Allstar node .  I am presently using a URI to connect the
> voice without a problem but I can't find details on the physical interface
> required for frequency agility. I understand that I may need some
> additional hardware to accomplish this but the 707 only has one data port
> (which the URI is presently attached to) and no separate CAT port.
>
> Can anyone point me in the right direction?
>
> LCM
>
> * Levi C. Maaia, K6LCM*
>
> www.levi.maaia.com
> +1.805.604.5384
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20151013/d1e76ea4/attachment.html>